THE MOST POWERFUL MOTO. The 16A motor has 55 JOULES of impact energy, 1900 BPM, and 1700W of output. It’s good for different types of work on different types of surface. The SDS-Hex system makes it easy to change bits without having to use tools.
【SAFETY. A built-in clutch protects the driver and reduces sudden and high torque if the bit gets stuck. It also extends the life of the motor.
Efficient’: The system automatically locks the bits so that they don’t fall out and get dusty. It gives users the most control and accuracy possible.
People who make things that are easy to us. The Duo Vibration Damping Technology (VDT) from Berserker lab can reduce vibration from bits to the handle with less noise. It works well at reducing tiredness. The body is made of aluminum alloy, magnesium alloy, and a fan system to keep it from overheating. The new Berserker Laboratory chuck design also reduces the shock to improve the impact energy by 20% as well, which makes the tool more powerful.
The media couldn’t be loaded because it was too big to move.
For the first time, SDS Max is a big change from SDS Plus.
It’s a lot better than SDS Max. SDS hex is only for demos.
When it comes to riding, there are horses for every job.
This brand keeps impressing me. My goal was to test this out for a while before giving it a fair review.
The hex fitting is very strong and well made. The build quality is very good all over.
Remember that this is only a demo tool, not a real one like the smaller ones.
A jackhammer that weighs 65 pounds is a good match for this tool.
The more power a tool has, the more weight it needs to keep it from moving around.
Because this tool weighs a lot and has a lot of power, it can be a little jumpy. They used all the power they could get from their home’s 20-amp service. Not all homes have 20amp circuits, so if the house only has 15 amp breakers, bring a small generator with you. You’ll trip the breakers if you use too much electricity.
A few examples from my own life.
It took me a while to dig some footings 12 inches wide and trenches 30 inches deep. Because the clay was so dense and hard, it was on par with old concrete. Use heavy picks and sledges to break up these runs. A machine trencher would not work because the footings are too close together and the walls would fall down if the trencher was moved around. An SDS Max hammer did a good job breaking up the dirt, but it took a long time and was very heavy. This tool was perfect for the job. It ripped through the dense dirt like a pro. I would go 15 inches down, move it back, and keep going. This lowers the height of the lifts, as 65 lbs can wear out your forearms if you do this for a long time. It takes us 20 minutes to switch out the people who work at our company. It’s a great app.
Next, we have to break up some 40-year-old walk ways that aren’t big enough for a pneumatic rental. The concrete was probably at least 2500 psi when it was poured. This hammer smashed this walkway in less than an hour. This was a great use of the hammer again. Quite impressive for a tool that has 20 amps of power, thoug.
As a next step, some concrete that was just put down was put down the wrong way. It has to be thrown away, about 50 feet by 5 feet wide and 8 to 10 inches thick. Our pneumatic rental was not available, so we brought out the Berserker Breaker. It did not stand a chance against the Berserker Breaker. Slowly, the concrete will be broken up by the tool, but there will be some problems with that, as well. Because the concrete is so hard, you have to be very careful and apply a lot of pressure to get a crack. This adds a lot of weight to your arm and hand, so you have to be very careful. Now the force isn’t strong enough to break through, so you’ll need two chances. Finally, it can be done, but the tools can’t do a job like this. When the area is small, it’s possible. I didn’t think this would be a huge success because 20amps isn’t a lot of power. But I wanted to try to get a sense of how the tools work. This is why I did this. Is this an insult to the tool. Not at all. Every tool has a use and a limit. You need to use the right tool for the job. It’s better not to blame the tool if you don’t know what you’re using it for.
The storage case isn’t strong enough to hold the weight of the tool, the latches aren’t strong enough, and the wheels only work on flat ground. I wouldn’t even think about deducting a star for this because the value of the tool itself is so high. If you want to use the max force demo tool but don’t want to spend a lot of money on the big names, this is the way to go. I think it’s great.
You can use a cart if the tool is too heavy. These can be hard to get used to, but if you use it all day, you won’t be Arnold. The cart takes a lot of the weight off your hands, arms, and shoulders. I haven’t tried it on a cart, which is a handtruck-like holder for these demo hammers. Keep your bits sharp, don’t make the job more difficult than it needs to be. We resharpen our bits after every use, because it makes a big difference to how well they work.
In the video below, I used my cell phone because I had it with me. There were tons of 4500 psi concrete mixed with waste that got in the way of our trench. Some places are 12″ thick. We could have called in the big pneumatic jack, but that would have taken us two days. The Berserker HEX isn’t strong enough to work with thick, dense concrete on a regular basis, but we had it on the truck, so we used it. It took 4 times as long as a pneumatic jack, but in 2 hours, we cleared the concrete waste and continued trenching. For the small contractor, this tool can be a huge time-saver because you can keep it on your truck and it runs off 20amps. Notice how close we worked to the edges, because the tool only has so much power. Concrete isn’t very strong at the edge. Contractors spend a lot of time and money, so this tool can pay for itself very quickly.
Very impressed with this tool guru, and I’m not one to be blown away by people. I can see this brand getting a lot of attention on Amazon against the big brands.
