The solvent and grip tape method is tried and true, but using an air compressor instead can be much more convenient. When using an air compressor to slide your grips on your clubs, it’s possible to get away without using tape at all. Like many aspects of golf, it all comes down to personal preference and “Feel.” Even though you can get away without using tape in the traditional sense, it can give players peace of mind to know their grip is securely bonded to the club.
The video above gives you a quick overview of how to install golf grips with air, but there are a few things you need to pay attention to when you install your grips for the first time. You will need the following equipment to install golf grips with air. Grips – Pure grips are made 100% from rubber and are specifically designed for air application.
Using a lexan tube just keeps the grip from blowing up. It can’t keep the stretching uniform and tolerable since the grip usually tapers so the distance to the tube ID isn’t uniform all the way down the grip. If you insist on using just masking tape then be sure to carefully align the grip graphics to something on the club head so you can tell if the grip start to slip.
If you’re removing an old, worn out or damaged grip from a golf club, cutting it off is an easy option. If you wish to save and reuse the grip – or perhaps you just don’t want to wield a knife around the club’s shaft – you can literally blow the grip off the club, using an air compressor. The grip will begin to loosen as the air from the compressor fills the inside of the shaft and forces the grip to expand.
best air compressor for golf grips Related Question:
Can you leave the old tape on when regripping golf clubs?
When regripping your clubs, there are three basic options for what to do with the grip tape that’s already on your clubs. One option is to leave the existing tape on your clubs and reuse it. This is possible, but it’s probably the least desirable of the three options.
How can I get my golf grips to dry faster?
Golf Clubs Re-gripping FAQ should be enough for the grip to dry, but specialists recommend waiting more time just in case. Depending on the type of solvent, the waiting may take from several hours to a day. If you need to play with the club meanwhile, you can always use a hairdryer, for example, to quicken the drying.
What solvent do you use for golf grips?
Mineral spirits, denatured alcohol, acetone, nail polish remover or charcoal lighter fluid, all provide adequate deactivation of grip tape to install new grips. They also evaporate relatively quickly to allow the grip tape to bond to the grip in a relatively short amount of time, often less than an hour.
Can you use masking tape to Regrip golf clubs?
However, if you’re short of cash, you can, in theory, use any double-sided tape for gripping your clubs. Masking tape, scotch tape, even double-sided duct tape (if you can find it) are all viable options to maintain the tack between your golf club and your golf grip.
Can you use wd40 to Regrip Golf Club?
There are tons of different substances you can use to regrip your golf clubs other than traditional grip solvent. Some of them include water, WD-40, air compressors, paint thinner, and rubber cement.
Can you use rubbing alcohol to Regrip golf clubs?
It’s sometimes the most tedious and least fun part of the re-gripping process, but Goo-Gone, Goof-Off, rubbing alcohol, etc., all work to help speed up the process.
Can you use white spirit to Regrip golf clubs?
Place the club in the vice with the head pointing up, taking care to use a shaft protector (or similar) to avoid damage as you tighten. Now take one of the new grips, cover the little hole at the end, and pour in a little White Spirit.
How long does it take to Regrip clubs?
The whole process of regripping golf clubs is probably going to take you somewhere between 1 to 2 hours. I wouldn’t call it an easy project, but once you do it once you’ll probably be comfortable doing it forever.
How long does it take for golf club grips to dry?
It’s tempting to take your clubs out for play once the grips on are. However we strongly recommend waiting at least 6 hrs after re-gripping. The solvent needs to completely cure and you’ll want to leave the clubs in a dry and cool area during this time.
What can I use instead of grip solvent?
Paint Thinner / Mineral Spirits Paint thinner or Mineral Spirits are cheap alternatives to grip solvent and also dry quickly. Like grip solvent, the mineral spirits will lubricate double-sided tape allowing you to work the grip over the shaft so that it adheres.
How long does it take for grip solvent to dry?
Allow ample drying time before using the club, it should usually be ready to use in about 30 minutes.
What does logo down mean on golf grips?
When you look down at the grip, you’ll see the Golf Pride logo at the bottom of the grip and the “align” at the top. They each align with a square clubface, and you’ll want to make sure your open hand slides directly underneath them, so you’re gripping the club in the fingers and not the palm.
What do the lines on a golf grip mean?
Generally speaking, it’s when the “line” or “V” created between the thumb and index fingers point toward the trail shoulder (right shoulder for right-handers) or beyond. This will indicate a strong position.
Can I use painters tape for golf grips?
Painters Tape. Golf grip tape is not needed, except for the edge to slip the grip onto the shaft.
How thick is golf grip tape?
This single-coated, masking tape is used for building up grip sizes. Each wrap adds about . 006″ thickness.
