Currently running a Timberwolf 3/4 wide blade with 2 teeth per inch. The blade I am running now has cut about 70 green bowl blanks and still cuts good. Does a great job, just make sure you watch your fingers.
05-31-2009, 10:46 PM #1 Best bandsaw blade for bowl blanks Hello everyone, I have a Jet bandsaw that uses 133″ blades. 06-08-2009, 3:34 PM #14 saw blade I have a Jet 20″ and have also used Timberwolf & Olson blades. 06-08-2009, 3:48 PM #15 I bought a 2 tpi AS 1/2″ blade from my local saw sharpening service which seems to work just fine for bowl blanks.
As a bowl turner I like to do most of my bowl preparation with some jigs I made for my bandsaw that will take a 2′ or 3′ log and I can use it to cut it down the center of the pith or cut it on each side of the pith so there is no pith in my bowl blanks, I usually will put on an 1″ or 1-1/4″ bandsaw blade and spend the day ripping my logs in half. I experimented with 3/8″, 1/2″ 5/8″ bandsaw blades for cutting bowl blanks. If I could find some good bandsaw blades I wanted to negotiate a discounted price for anyone who might need one or two from both our facebook group, Wood Turning Basics https://www.
For cutting out bowl blanks and rough resawing, you want a bimetal blade. This is the same blade that the protable bandsaw mills use. The Carbide tipped blades are for cutting veneers, and fancy resawing of boards that you want to bookmatch for flat work.
1 – The bandsaw blade length is specific to each model bandsaw. Watch where the bandsaw blade is contained and slowly free it from each section of the bandsaw. When the blade is up to speed, I feed in the left edge of the green wood bowl blank and begin following the edge of the cardboard circle, without cutting the cardboard.
I was using it for resaw stuff down to pen blank size. He took my Griz apart, re-did everything and it still wouldn’t track or cut. He said the saw was great, set up just right, just a POC blade.
Select Product Options Here Length: Select Length 70-1/2 inch 72 inch 73 inch 80-1/2 inch 82 inch 89-1/2 inch 93-1/2 inch 95 inch 98 inch 99-3/4 inch 100 inch 101 inch 104 inch 105 inch 106 inch 111 inch 112 inch 113 inch 115 inch 116 inch 118 inch 120 inch 123 inch 124 inch 125 inch 126 inch 128 inch 130 inch 131-1/2 inch 132 inch 133 inch 136 inch 137 inch 140 inch 142 inch 143 inch 145 inch 149 inch 150 inch 153 inch 154 inch 155 inch 156-1/2 inch 158 inch 160 inch 161 inch 162 inch 165 inch 183 inch. Our 3/8 inch wide WoodTurner’s Bandsaw Blade, with its 3 TPI, alternate set tooth pattern & stout band thickness of.032 inch, is just the blade for the task. The 3/8 inch wide band allows a cutting radius as small as 1-1/2 inch.
best bandsaw blade for bowl blanks Related Question:
What size band saw for blank bowls?
While a 17” bandsaw can easily handle a bowl blank that is eight inches tall and 16 or 18” in diameter, a 14” bandsaw may only have a cutting depth of five or six inches. With a six-inch cutting depth, or height, a 14” bandsaw cannot handle blanks taller than six inches.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
How do you seal wood to turn blanks?
Once the wood has been air dried and cut to the final size I usually seal the end grain with wax. Canning wax, Candle wax, Paraffin wax, any type of wax that turns to liquid when heated will work fine for sealing wood blanks.
What are bowl blanks?
Bowl Blanks: Wood bowl turning is one of the most popular ways to use a lathe. Our bowl blanks are cut with the grain going across the face so that it can be mounted perpendicular to the axis of rotation. This allows face plate turning to occur without major tearout.
What is a 3h bandsaw blade?
Description. These are excellent-quality steel bandsaw blades that excel at ripping thick stock and resawing, and are also suitable for roughing blanks for carving or turning. The coarse 3 tpi hooked teeth power through hard woods and difficult grain, and have deep gullets for clearing sawdust.
What bandsaw blade is best for resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
Does bandsaw blade thickness matter?
Bandsaw Blade Thickness The thickness of the blade depends on the diameter of the wheels, and the work to be done. Thick blades withstand more cutting strain from straight cuts but can break more easily from the bending and twisting action. Thinner blades perform well for lighter work.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
What speed should you cut metal with on a band saw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
What is the throat on a band saw?
The throat is the distance from the blade to the vertical frame section of the body of the saw. This distance determines the width of cut that can be completed on the band saw. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.