Accura has always been among our top choices because they have been making these guides for a long time and in that time, they have mastered the craft of making guides. This model sports a premium build and has three bandsaw guide bearings. The main job of the guide is to ‘guide’ the blade so that it stays perpendicular.
Although Iturra does not recommend using its Band Rollers with blades less than 1⁄8 “, I tested mine with 1⁄8 “, 1⁄4 “, and 1⁄2 ” blades, cutting thick stock and making tight-radius cuts to force the blade against the bearings. These bearing guides showed no signs of wear, a big upgrade from my square-block graphite guides. When cutting arcs and circular shapes-and especially in resawing-the bearings proved much better than my old graphite guides at holding the blade perpendicular to the workpiece with no twisting or deflection.
02-11-2013, 8:46 AM #1 Best bandsaw guides I am going to change the guides on mu Grizzly G555LX band saw. Without being able to look, I don’t know if your lower guide and thrust bearing is the same design as a Jet, or a Delta 14″.The Delta guides are closer to the underside of the table than a Jet and are oriented differently. I changed my Grizzly G0555P bandsaw guides to cool blocks.
“The cheap blade guides from my 14” bandsaw were the easiest to adjust. The homemade guides work just as well, and, surprisingly, aren’t any more annoying to adjust than the fancy aftermarket blade guides or the big guides that Ted sent me. A properly adjusted set of blade guides will guide the blade perfectly well, and a fancy aftermarket guides don’t improve on that.
Bridgewood 18″ Band Saw Guide Upgrade KitBecause of manufacturers variations in the saw, the Bridgewood 18″ saw has two kit options. This provides your saw with reduced blade friction, improved cutting accuracy, and is adjustable for blade widths from 3/16″ to 1 1/4″. P C GAKIT BUF14.”Buffalo14″Buffalo Saw Guide Conversion KitBuffalo Band Saw Aftermarket Parts.”14″ Buffalo Band Saw Guide Conversion kit. “Delta 14″ Hex Micro-Adjust Guide Kit.The Delta 14″ Hex Micro-Adjust upgrade kit updates your saws performance through the use of Tool-Less Micro-Adjustable guides and is for use with Delta 14” saws that have a hexagonal upper guide post.
best bandsaw blade guides Related Question:
How high should you keep the blade guide on a band saw?
Make sure the blade is positioned properly on the track. Adjust blade guard height to about 3 mm or 1/8 inch to 6mm or 1/4 inch above the top of the material being cut. Wider gaps will place tension on the blade and increase the risk of breaking.
What is the purpose of having blade guides on a band saw?
Bandsaw blade guides keep the bandsaw blade on track while cutting through materials. Blade guides should be set above and below the saw table to help reduce vibration by holding the bandsaw blade in place while cutting. This assures a precise and quality cut.
What is the number 1 safety rule of the band saw?
Safety Rules Safety glasses are required. Never clear small pieces while blade is moving. Never adjust saw or setup while saw is running. Never cross arms.
At what distance should the guide be set on the band saw?
Set the front of the blade guide about one-sixteenth of an inch from the deepest part of the blade gullets (the spaces between the teeth on the blade). The blade guides must ride behind the teeth on the bandsaw blade. The teeth of a bandsaw blade have a tooth set, a slight flare to the outside of the blade.
How many teeth does a bandsaw blade have?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
What is a skip tooth band saw blade?
Skip tooth blades have widely spaced teeth at a 0 degree rake angle to prevent clogging when cutting soft wood, non-ferrous metals and plastics. Hook tooth blades have a deeper gullet—that is, larger teeth—and a positive 10 degree rake angle. This helps the blade to feed into the material more aggressively.
What are the different types of circular saw blades?
Blade Types: Generally speaking there are four major categories of circular saw blades. They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
How do I choose a bandsaw?
The two main things to consider when choosing a band saw are the depth of cut and the throat. The saw’s depth of cut is the distance from the table to the upper blade guides. Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw.
Why do bandsaws wander?
If the wheels are worn and do not have a distinct top to the crown then the blade will not know where to go, and may wander around. This of course can cause poor cut quality and difficulty in setting the guides.
Why can’t I cut a straight line with my bandsaw?
Band Saw: Why won’t my band saw cut straight? When the band saw cuts crooked, a dull blade, improper feeding, loose blade tension or not using a work piece guide could be the cause. Use the rip fence or miter gauge to guide the work piece uniformly through the cutting blade to make straight cuts.
Can you rip wood on a bandsaw?
A band saw can shape curves, saw rough lumber safely, cut joinery, and even rip boards to width.
What does resaw mean on a bandsaw?
A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade – commonly 2 to 3 inches (52–78 mm) – with a small kerf to minimize waste.
What should you do if the blade breaks while operating the band saw?
If blade breaks during operation immediately stop the saw, leave the stock where it is, unplug the saw and report the incident to the teacher.
What side of the band saw should you never stand on?
4. Do not allow anyone (including yourself) to stand on the right side of the bandsaw while it is running. A broken blade is likely to fly in that direction.
When using a horizontal band saw you should adjust the blade guide as close to the work as possible?
The upper guide and guard should be set as close to the work as possible, at least within 1/4 inch. If the band breaks, immediately shut off the power and stand clear until the machine has stopped. Examine blade before installing to see if it is cracked, do not install a cracked blade.