Sawmill range will help you unleash the true potential of your sawmill. Sawmill bandsaw blades is not only ground, using computer-controlled machinery for exceptional cutting performance, but also deep hardened to allow for up to 100% more regrinds per blade than the competition, that’s twice the life. Speak to a member of our helpful team today on +44 1977 705 600 to learn more about how our sawmill bandsaw blades can transform your cutting.
Well of course I’ve went threw several 100 blades but the guy I got my mill from hooked me up with this ripper blade dealer. Long story short I’ve never even known my blade length. Since your website says that “All orders should be placed online” and you don’t carry my blade length on your website, I purchase my blades from other FF site sponsors Menominee Saw or Cooks.
According to the blade manufacture’s they all make the best blade. If you are really serious about the best blade and price is secondary, then go with a carbide tipped blade like the Starrett Advanz carbide tipped blade. As eddiemac said stay with just a few blades the same and you life will be much happier.
Here is a helpful guide to understanding different parts of a band sawmill blade and how to choose the best blade profile and material for your sawing application. “E. Tooth Set is the distance the tooth is bent beyond the body or raker tooth of the blade. Tooth set clears a path in the wood for the body of the blade which is measured by kerf or the total amount of wood removed by the blade with each pass. Wood-Mizer thin kerf blades remove less than 1/10” which produces about 20% more boards per log than circle mills or chainsaws. With hundreds of combinations based on profile and material, every Wood-Mizer sawmill blade tooth is precisely set by computer-controlled equipment and completely profile ground tip to tip using super abrasive grinding technology to ensure the highest quality blade performance.
The first box I bought was probably some of the best blades I have ever ran. My freind got a box of cooks magnum SS blades that one side of the blades were not set at all. The lenox blades were cheaper, lasted for more sharpenings and stayed sharp very well.
WoodMaxx premium band saw blades for wood are ideal for sawmills and other applications where band sawmill blades are used, including; thin kerf saw mills, pallet mills, portable sawmills, horizontal resaws and vertical resaws. “WoodMaxx premium quality band saw blades are the result of over 110 years of experience in engineering, designing and manufacturing the best sharp edge, cutting products in the industry.” “WoodMaxx: The maximum quality, maximum value and maximum performance saw blade for all your wood cutting needs. Call 877-366-1696 or visit us at WoodMaxxBlades.com.”
best bandsaw mill blades Related Question:
What is the best blade for a sawmill?
9° Sawmill Blades – Ideal blade for lower horsepower (24HP and below) sawing frozen wood, hardwood, and small diameter logs. 10° Sawmill Blades – Very popular all-purpose blade for sawing mixed hardwoods such as red oak, cherry, walnut, soft maple, and poplar.
How long do bandsaw mill blades last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
What kind of steel are sawmill blades?
Carbon steel is the most common metal used to manufacture sawmill blades and performs well for high production.
How thick is a sawmill blade?
The plate of a circular saw blade is typically 1/8 inch to 1/4 inch thick.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
How do I choose a bandsaw blade?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What bandsaw blade is best for resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
How many times can a bandsaw blade be sharpened?
It often makes sense to replace a dull blade with a new one, but you can sometimes get the best value out of merely sharpening an old blade instead of replacing it altogether. You should typically be able to get two to three sharpenings before you need to change your blade completely.
How many times can you sharpen a bandsaw mill blade?
You should be able to sharpen your blade two or three times before needing to replace it, but sometimes breakage happens. Blade breakage can result from a range of situations. Common causes of blade breakage include: Dull teeth.
Are bandsaw blades worth sharpening?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
Should you oil a bandsaw blade?
A band saw blade is a tool. You must lubricate both sides! In both cases, we know for a fact that lubrication of the body of the band increases band life by over 30%. Applied sparingly, you can cut grade lumber with NO staining to your product.
Are old saw blades good for making knives?
The biggest advantage of using an old saw is the lack of metallurgy you need to do. The blade is already the right hardness for holding an edge, so you don’t need to treat the steel to make it a good knife.
Are old saw blades worth anything?
The reason is simple: old circular saw blades aren’t worth anything because they’re made with carbon steel. The only way to modify them is by adding some decorative elements but even then they will never become real jewelry pieces.
Are saw blades hardened steel?
Steel needs to be hard enough to cut through things like tree trunks. To cut through things, the hardness of the saw blade will play a pivotal role. Table saw blades are hardened to ensure that they cut through things with relative ease. You can make the table saw edges using various kinds of steel.
What is the best TPI for cutting wood?
If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.