You can sand about 3 to 4 coats of the solid deck stain using these belt sanders while preserving the deck wood’s integrity. The deck belt sander has a unique suspension system that’ll reduce instances of shaking, and hence the system will be more stable. The belt sander has a ½-sheet sander allowing you to cover more massive ground and material in a short time – great frame and power.
There are basic differences between a belt sander and an orbital sander. The Orbital Sander sanding uses the discs to revolve in small circles, whereas the Belt Sander uses a continuous loop of sandpaper. Sand the deck with 20 to 50 grit sandpaper on the first pass and 60 to 80 grit on the second run on a belt sander to open the wood grain so it absorbs stain or paint.
Working with a power sander requires a bit of a learning curve, but we’re here to start you off in the right place with our recommendations for the best sanders for deck refinishing. We’ll cover the different types of sanders available-and which are best for deck projects-as well as how to find the best sander for your needs. We have a list of the seven best sander for deck refinishing to share with you, ensuring you’ll find the best tool for the job without wasting daylight scouring the web for answers.
There are a few sites where you can find some epic comparisons of the different sanders, but ultimately, the belt sander is the more intense sanding machine. If you are looking for the best sander for deck refinishing, do not be scared away from using a belt sander if that is the type of sander you have at home or in your workshop already. Before you sand it down, make sure your wood has dried properly after you cleaned it.
best belt sander for a deck Related Question:
Can I use a belt sander on my deck?
Can you use a belt sander on a deck? Using a belt sander on a deck is one of the great ways to sand your deck. So ‘yes” I would definitely use a belt sander on a deck. Just make sure you go in the direction of the timber.
What type of sander is best for decks?
Remember that woods used on decks are typically soft-wood species. Belt sanders, whether hand-held models or large uprights, tend to gouge softwoods, so an oscillating or random orbit sander is usually the better choice. Make sure your deck is thoroughly dry before you sand.
Can I use a floor sander to sand my deck?
It is possible to use a floor sander to sand your deck, although we still advise you to use a hand-held belt sander for best results. The steps for sanding with a floor sander are very similar to the ones described above, except you replace the step using the belt sander with using the floor sander.
Is it better to sand or power wash a deck?
DO sand your deck before sealing. At that point, lightly sand the surface to remove splintery or fuzzy patches caused by pressure-washing the deck. A pole sander with 80-grit sandpaper will suffice; a power sander is overkill. Then seal the deck to protect from cracking, cupping, and warping.
Is it better to sand or strip wood deck?
Sanding is preferable where less penetration is required and the deck is flat, but the process requires additional labor and time to achieve consistent results. A stripper can often be the best option for larger decks, even though the cost will be significantly higher.
What is the difference between a belt sander and an orbital sander?
The common differences between all belt sanders and orbital sanders are: A belt sander is more effective for large materials, while the orbital sander is ideal for small spaces and pieces of furniture. A belt sander works effectively on flat surfaces, while an orbital sander can work with various angles.
Should I wash my deck after sanding?
After sanding, power-wash the deck and allow it to dry for at least 24 hours before staining. Sanding exposes porous wood that’s ready to soak up the stain, but this isn’t possible if the wood is full of water.
Should I use a drum sander on my deck?
Use an Orbital Sander—Not a Drum Sander An orbital flooring sander is safe to use on decks, and it’s faster and easier than hand sanding. A flooring drum sander removes too much material too quickly to use safely on a deck. Most decks are made from softwoods, and the surface is more uneven than an interior floor.
How long should deck dry before sanding?
To restore wood luster and the pH levels, apply wood brightener after cleaning. Once the deck is clean, let it dry for the recommended time – between 24 and 48 hours is common – before sanding.
Can I use a floor sander on my wood deck?
Some homeowners will want to rent a big floor sander to do a large wooden surface like a deck floor. Don’t do that. These machines are heavy and they won’t be able to reach the entire surface of most wooden planks. Floor sanders can only sand surfaces that are perfectly flat, and deck boards are slightly curved.
What happens if it rains after I sand my deck?
It’s important that you make sure there is no chance of rain when you begin to sand. If the wood gets wet after it’s been sanded, but not before you’ve had the chance to stain or paint it, you’ll be back to square one — you’ll need to wash and sand it all over again.
Do you sand or clean deck first?
It is important, to begin with, a power sander and always finish by hand to reach difficult areas. Remember no more than 60 or 80 grit paper. The next step is to clean the wood thoroughly after the sanding. Deck cleaners, also known as deck wash are used to lift dirt and unsightly mildew which accumulates over time.
Do you powerwash a deck before sanding?
Splintered, cracking, or just plain rough wood should be sanded first, then pressure washed to open the wood’s pores and allow penetration of the stain. Deeply grooved wood that has mold, moss and other growing things filling the cracks will need treatment with a deck and siding cleaner.
Can you sand a pressure treated deck?
Sanding pressure-treated wood is actually contraindicated because, as Sand & Stain warns, you’ll end up partially removing the protective coating created by the pressure treatment, and the wood will look terrible.
How much does it cost to sand a deck?
The cost to sand a deck is $280 on average. Most homeowners spend between $210 and $350 for a 200-square foot deck, which takes about seven hours to sand. If you choose to sand your deck yourself, you’ll need to purchase an orbital sander, which costs $75 on average.