The only saw I have is a MS390 and was thinking of getting a bar and milling chain for it, and trying to cut up the two trees I have downed. Im currently useing a stihl; 28 inch bar in a 24 inch timbertuff alaskan mill! 28 was as big as I could find locally in northern illinois! I started useing a stihl standard chistle chain but they dont last long ripping! I then purchased a woodland pro 11 degree ripping chain from Bailieys! Wow is all I can say what a difference! Smoother cut, stays sharp much longer etc etc. “All I have to use right now is my Sthil MS390 with a 30” 3/8.063 bar and Granberg milling chain.
We can say that the cutting angle was always a constant 10 degrees, which is standard for a ripping chain. You have to keep in mind that your output will vary depending on what kind of ripping chain you have. So if you’re getting any one of them, you can probably get the best ripping chain for your chainsaw.
“Ive tried several combos and found the most efficient to be baileys.365 ripping chain to be my favorite. I run it on 20 and 28” bars. I have not yet broke the.365 chains running them on husky 394’s, but you need to keep an eye on chain tension. The.365 takes a much smaller kerf and both chains carry good speed and leave a good surface.
You need to use an appropriately sized chainsaw and chainsaw bar and the right type of chain on the saw. If you are processing timber using a chainsaw in a chainsaw mill, you need to change the chain to a type more appropriate to this cutting task. Using a standard chain on a mill will cause additional wear on your chainsaw motor, gears, and the chain itself.
If you’re looking for a ripping chain that can handle tougher projects, the Archer ripping chainsaw chain is an excellent option. A ripping chain is only as good as the saw that it’s attached to, and a good ripping chain can make all the difference when it comes to milling. The number of drive links in a ripping chain is also important to consider when choosing the best ripping chains.
best chainsaw blade for milling Related Question:
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
Is chainsaw milling worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
Do I need a ripping chain?
Do I Need A Ripping Chain? If you are milling and want to have a smooth finish to your cuts, then a Ripping chain provides a huge advantage over a regular x-cutting chain. You should also get some speed advantages in using a Ripping chain.
What is a chainsaw ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
What is the difference in a ripping chain?
While most chainsaw chain is designed to cut across the grain of the wood you’re cutting, ripping chain is specially modified to cut along the grain. One of the main differences between ripping chain and crosscut chain is the angle that the teeth are sharpened at.
How big of a chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
What is the advantage of a skip tooth chain?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
What is full chisel chain?
A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.
How fast does a chainsaw mill cut?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
How well do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Will a Oregon chain fit a Stihl?
Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. This product is only available through retailers or servicing dealers. Designed to fit most chainsaw models that require a 3/8 Inch low-profile pitch, .
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
Can you cross cut with a ripping chain?
Re: Crosscutting with ripping chain? Yup Results will vary depending on the style ripping chain you have, fewer top plates or less top plate area is going to slow your cut a lot. My 066 cuts like an 046 on steroids when crosscutting with a full comp ripping chain and leaves a smoother surface.
What angle do you sharpen a chainsaw for ripping?
Sharpening Angle Of Ripping Chain When sharpening this chain, the top-plate filing angle should be 10°- 15°. The file should also be tilted down about 10°.
What angle do I grind my chainsaw chain?
Always hold the file at a right angle (90°) to the guide bar. The file only sharpens on the forward stroke – lift the file off the cutter on the backstroke. Rotate the file a little at regular intervals while filing to avoid one-sided wear.