The Viking Footwear Class 2 Chainsaw boot is one of our top choices for chainsaw boots. Even though online retailers indicate the sizes of the boots, take a couple of minutes to sieve through the comments and reviews to see how accurate the sizing is. Any rational buyer is usually quick in pointing out a chainsaw boot that falls apart within months of making a purchase.
The Viking Footwear Class 2 Chainsaw boot is one of our top choices for chainsaw boots. Here is a guide that will help you choose the best chainsaw boot next time you go shopping for one. Chainsaw boots are divided into three principal protection classes according to a particular chainsaw speed’s resistance capacity.
All personal protective equipment is important to chainsaw safety, but chainsaw boots have one of the most complex jobs in keeping you safe. Secondly, a good chainsaw boot needs to be weather resistant – there’s nothing more uncomfortable than working for hours in wet boots! Many boots have a waterproof lining, with Gore-Tex offering the ultimate level of waterproofing and breathability. Designed for maximum comfort and utility, these boots have a Gore Tex waterproof lining, a rubber sole for good slip resistance in wet environments, a shock absorbing sole and a steel toecap with Class 1 chainsaw protection.
Review of the Best Chainsaw Safety BootsTo help you pick the best chainsaw safety boots, here are some recommendations that cover a variety of potential work situations. What separates average work boots from great chainsaw safety boots is always a combination of properties, unique material blends, and various safety and comfort features. Depending on the safety standards that the boots were made for, chainsaw safety boots have to resist a specific penetration force.
This is the reason why wearing safety footwear, particularly chainsaw safety boots is essential when using a chainsaw. If it is your first to purchase chainsaw boots – or if you are looking for a replacement for your old one – then take a pick from these best chainsaw safety boots. The reasons why one needs to have chainsaw boots and not just any other pair of shoes are the safety features in these boots.
best chainsaw boots 2021 Related Question:
Will composite toe stop a chainsaw?
Re: Chainsaw Boots, Recommendations. Composite protective toe caps offer as much cut protection as a piece of wood. Making a living with a saw since age 16.
Do you need steel toe boots for chainsaw?
The chainsaw protective boot is not required to have a steel or composite toe for a saw operator. However, it’s pretty hard to find a chainsaw cut-resistant material boot without the safety toe. I personally don’t see any reason not to want one.
Are chainsaw boots necessary?
The most important reason why you should use chainsaw boots is overall protection. Both for the chain and falling objects from trees. But they also give a firm grip on the ground when working on different terrains and surfaces.
What is the best class for chainsaw pants?
Class 1 trousers have been tested to provide protection against chainsaws with speeds of 20 m/s. Class 2 have been tested with a chainsaw running at 24 m/s. Class 3 are the hardest wearing and offer protection against chainsaws with speeds up to 28m/s.
How much heavier are steel toe boots?
On average work boots weigh around 2 to 3 pounds whereas a steel-toe boot weighs up to 4.0 to 4.5 lbs (1.8 kg), and that of an alloy toe is nearly 1.5 pounds lesser. A composite-toe boot weighs up from 1.75 to 4 pounds.
Are composite toe boots stronger than steel toes?
Steel toe boots offer more protection than composite toe boots since they can withstand higher impact. They are less expensive than composite toe boots. However, steel toe boots are heavier and do not breathe as well as composite toe boots.
What does class 1 chainsaw boots mean?
Class 1 is the lowest allowable safety protection provided by chainsaw boots. These boots have a steel cap covering the toes to ensure the running blade doesn’t penetrate the shoe and harm the feet. Class 1 boots are designed to withstand 20m/s speed chainsaw blades.
How do you wear chainsaw boots?
Wear Them Around the House One of the most common ways to break in your new safety boots is by wearing them around the house. Do this daily for ten minutes or so at first, and gradually increase the time spent wearing them. You should do this for a while before you wear them for a full day’s work.
How do you take care of a chainsaw boot?
Once the dirt has been removed use a damp cloth (3) to wipe the surface of the boots to remove any residue. If the boots are covered in wet mud hold the boots under slow running water and with a brush remove the dirt and wipe over with a cloth to remove excess moisture. Take care that no water enters the boots.
What are chainsaw boots made of?
It is the support structure that provides rigidity and stability in safety boots. The shank can be made from a variety of materials including steel, plastic, fibreglass and kevlar. They stiffen the outsole to give a more stable fit.
What safety equipment should be worn when operating a chainsaw?
When working with a chainsaw, you should wear a helmet, visor and/or goggles, ear defenders, protective trousers and jacket, chainsaw chaps, safety mitt, gloves, and last but not least, steel-toe boots.
Do chainsaw chaps really work?
Yes, chainsaw chaps are essential safety and protective equipment for anyone operating a chainsaw. They will protect your legs in case the chainsaw would hit your leg. It is just ideal for every chainsaw user, especially those that do professional heavy-duty tasks.
What is the difference between Type A and C chainsaw trousers?
As mentioned above, the main difference between Type A and Type C PPE trousers is given by the surface the protective layer covers. Because they’re intended for ground workers, Type A chainsaw trousers will only protect the front of the leg, while Type C will protect the entire surface of the leg.
What does class 2 chainsaw trousers mean?
Class 1 products are tested with a chainsaw speed of 20m/s. Class 2 products at 24m/s and Class 3 at 28m/s.
How much do Timberland PRO steel toe boots weigh?
Other performance features include the Timberland PRO® rubber outsole that’s slip-resistant and oil-resistant. The lightweight work boots weigh an average of 3.62 pounds per pair. These men’s boots are 6-inches tall and made with tumbled leather.