Having a dedicated chainsaw for milling purposes would provide ultimate convenience to handle lumber. We outlined already how a chainsaw offers convenience and helps immensely in cutting down the costs associated with lumber milling. If you are still confused, then go with our suggestion of choosing Echo CS-590 Timber Wolf as it’s indeed the best chainsaw for milling available in 2022 that features a powerful 59.8cc gas engine along with an extra sharp bar and chain.
The only saw I have is a MS390 and was thinking of getting a bar and milling chain for it, and trying to cut up the two trees I have downed. Im currently useing a stihl; 28 inch bar in a 24 inch timbertuff alaskan mill! 28 was as big as I could find locally in northern illinois! I started useing a stihl standard chistle chain but they dont last long ripping! I then purchased a woodland pro 11 degree ripping chain from Bailieys! Wow is all I can say what a difference! Smoother cut, stays sharp much longer etc etc. “All I have to use right now is my Sthil MS390 with a 30” 3/8.063 bar and Granberg milling chain.
Ripping chain is a special chain designed for cutting parallel to the wood grain. The chain pictured above is Oregon #72RD. This chain may not look much different than conventional saw chain, but close inspection will reveal the cutter teeth are ground with a blunter top-plate filing angle. Milling conditions can vary widely, so plan on doing some experimentation to fine-tune your ripping chain for maximum performance.
You need to use an appropriately sized chainsaw and chainsaw bar and the right type of chain on the saw. If you are processing timber using a chainsaw in a chainsaw mill, you need to change the chain to a type more appropriate to this cutting task. Using a standard chain on a mill will cause additional wear on your chainsaw motor, gears, and the chain itself.
best chainsaw chain for alaskan mill Related Question:
What is the best size chainsaw for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
Do I need a ripping chain?
Do I Need A Ripping Chain? If you are milling and want to have a smooth finish to your cuts, then a Ripping chain provides a huge advantage over a regular x-cutting chain. You should also get some speed advantages in using a Ripping chain.
What’s the difference between a ripping chain and a regular chain?
While most chainsaw chain is designed to cut across the grain of the wood you’re cutting, ripping chain is specially modified to cut along the grain. One of the main differences between ripping chain and crosscut chain is the angle that the teeth are sharpened at.
What CC is Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be.
How long does it take to mill a log with a chainsaw?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
What is a chainsaw ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
What chainsaw chains do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
What chainsaw chain do professionals use?
Typically only professionals and experienced chainsaw users use full chisel chainsaw chains. They are typically used to cut through hardwood such as oak as their square-cornered cutting teeth are more geared up to power through the wood.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What angle is a ripping chain?
When sharpening this chain, the top-plate filing angle should be 10°- 15°. The file should also be tilted down about 10°. The depth gauge height is different on this chain, too.
What is the advantage of a skip tooth chain?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
Can you cross cut with a ripping chain?
Re: Crosscutting with ripping chain? Yup Results will vary depending on the style ripping chain you have, fewer top plates or less top plate area is going to slow your cut a lot. My 066 cuts like an 046 on steroids when crosscutting with a full comp ripping chain and leaves a smoother surface.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
Are chainsaw mills any good?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.