“Ive tried several combos and found the most efficient to be baileys.365 ripping chain to be my favorite. I run it on 20 and 28” bars. I have not yet broke the.365 chains running them on husky 394’s, but you need to keep an eye on chain tension. The.365 takes a much smaller kerf and both chains carry good speed and leave a good surface.
The only saw I have is a MS390 and was thinking of getting a bar and milling chain for it, and trying to cut up the two trees I have downed. Im currently useing a stihl; 28 inch bar in a 24 inch timbertuff alaskan mill! 28 was as big as I could find locally in northern illinois! I started useing a stihl standard chistle chain but they dont last long ripping! I then purchased a woodland pro 11 degree ripping chain from Bailieys! Wow is all I can say what a difference! Smoother cut, stays sharp much longer etc etc. “All I have to use right now is my Sthil MS390 with a 30” 3/8.063 bar and Granberg milling chain.
We can say that the cutting angle was always a constant 10 degrees, which is standard for a ripping chain. You have to keep in mind that your output will vary depending on what kind of ripping chain you have. So if you’re getting any one of them, you can probably get the best ripping chain for your chainsaw.
You can purchase standard crosscut chain with the teeth at 35 degree angle or oregon rip chain with the teeth at a 10 degree angle and modify it to produce the smoothest lumber. After milling over so many years with chainsaw millsof all descriptions, here is what I suggest…. Full house Chainsaw chain:For smooth lumber at a decent rate of speed, you must use full house chain and modify the chain as I mentioned previously, you will be pleasantly surprised at how smooth the lumber comes of the mill. Quite a few companies out there are using P.M.X. chain or small mini chain for milling lumber.
best chainsaw chain for slabbing Related Question:
What chainsaw chain do professionals use?
Typically only professionals and experienced chainsaw users use full chisel chainsaw chains. They are typically used to cut through hardwood such as oak as their square-cornered cutting teeth are more geared up to power through the wood.
Do I need a ripping chain?
Do I Need A Ripping Chain? If you are milling and want to have a smooth finish to your cuts, then a Ripping chain provides a huge advantage over a regular x-cutting chain. You should also get some speed advantages in using a Ripping chain.
What is a chainsaw ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
Can you cross cut with a ripping chain?
Re: Crosscutting with ripping chain? Yup Results will vary depending on the style ripping chain you have, fewer top plates or less top plate area is going to slow your cut a lot. My 066 cuts like an 046 on steroids when crosscutting with a full comp ripping chain and leaves a smoother surface.
What is the angle of a ripping chain?
When sharpening this chain, the top-plate filing angle should be 10°- 15°. The file should also be tilted down about 10°.
What is the longest lasting chainsaw chain?
Even more durable than standard chain is carbide-tip chainsaw chain. Carbide tips last longer than chrome and are not affected by heat. Because of these qualities, carbide chain is excellent for cutting objects that would dull standard chain quickly, such as railroad ties.
Whats the difference between green and yellow Stihl chains?
Others will chime, looks like green is homeowner (and dirty condition) safety chain. That stays sharper longer in dirty conditions. The yellow looks like full chisel, cuts faster but dulls quicker. I like full chisel and just keep it sharp.
What chainsaw pitch is best?
Experts say the best chainsaw chain for cutting firewood is the Husqvarna High Performance 18 inches, 0.05 gauge, 0.325 pitch chain.
What is the advantage of a skip tooth chain?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
Will a Oregon chain fit a Stihl?
Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. This product is only available through retailers or servicing dealers. Designed to fit most chainsaw models that require a 3/8 Inch low-profile pitch, .
How do you tell the difference between a ripping chain and a regular chain?
While most chainsaw chain is designed to cut across the grain of the wood you’re cutting, ripping chain is specially modified to cut along the grain. One of the main differences between ripping chain and crosscut chain is the angle that the teeth are sharpened at.
What is full chisel chain?
A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.
What type of chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).