The most common and useful size for DIYers is 7 and 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.
Buy a good circular saw now and you can expect to still be using it in 10 or 20 years. Many tool manufacturers now offer sets of power tools that use the same batteries, and if you already own several tools by one manufacturer, adding a cordless circular saw that uses the same batteries is an affordable option. A well-shaped handle and good balance can go a long way toward making a saw more comfortable and efficient to use, so don’t overlook these features when choosing a circular saw.
Power is what gives the saw cutting ability, the higher the power, the better, when it comes to choosing a circular saw. There are two figures used by manufacturers to rate the power of a circular saw in the UK and Europe Watts is used and in the US amperes are used. For cordless circular saws as with other cordless power tools, the Volts will determine how much power is available, the most common power supply or battery size for power tools is 18V. As I said before many top brands like Hikoki, DeWalt and Makita have invested in new Lithium-ion technology and offer much higher voltage cordless options that give a great cutting performance.
best size for circular saw Related Question:
How do I know what size circular saw to buy?
Circular Saw Features Blade capacity determines the maximum depth of cut a saw can achieve. The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
Can a 6.5 inch circular saw cut a 2×4?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
How deep can a 7 1/4 inch circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
What is the most popular size circular saw?
The most common and useful size for DIYers is 7 and 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
How thick of wood can a 5 1 2 circular saw cut?
The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.
Can you use a 7 blade on a 6.5 circular saw?
NO, a 7″ blade will not fit inside the blade guard. Also, it’s rough on these little saws cutting concrete or tile unless you reduce the blade size.
How thick can a 6 1 2 circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
Will a 4.5 inch circular saw cut a 2×4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
What size circular saw Do I need to cut 2×4?
You need a minimum 5-3/8 inch size circular saw blade to cut a 2X4 at a 90 degree angle in one cut which is a crosscut. If you want to cut a 45 degree bevel with this size circular saw it will take 2 cuts. You could go with a 7-1/4inch or 10 inch blade to avoid making multiple cuts with the 45 degree bevel angle.
Can a 5.5 inch circular saw cut a 2×4?
The Ryobi cicular saw is a 5.5″ saw, and it can cut a 2×4, just barely.
Will a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
What saw should I buy first?
A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.
Is it okay to cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
What is a 40 tooth saw blade used for?
General Purpose Saw Blade. Diablo’s general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo’s blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks.
