To save you time and money from damaged materials, I have written the best circular saw blade for plywood reviews. While cutting plywood with a circular saw, stack a sheet face down so that chips or burrs appear on the bad side, where your saw slides. Back to menu Circular Saw Blade for Plywood FAQ. In this section, I answered frequently asked questions from my readers about working with plywood.
“I need a 7¼” blade to cut 4×8′ sheets of plywood for cabinets. Handle the saw carefully because the telescoping blade guard will not extend through the zero-clearance base to cover the spinning blade. Then retract the saw blade above the base, and attach the zeroclearance plate using double-face tape.
If you are using a straight edge for guiding your circular saw, you may also check to make sure your base plate is actually parallel with the blade. Also… a clean blade with no pitch helps greatly.
In general, many woodworkers either use combination blades or rip blades when cutting plywood, and both types of blades are perfect for plywood cutting. Given the many types of brands and models of circular saw blades in the market today, choosing the best blades become doubly difficult. A circular saw is a versatile tool, and as long as you are using the right blade, you can quickly cut through plywood using a circular saw and end up with a refined finish.
01-12-2011, 8:31 PM #1 Cutting 3/4″ baltic birch plywood with the circular saw. 01-12-2011, 8:47 PM #3 And use blue painters tape when cross cutting the face of plywood. I’ve used 2 blades, one a traditional steel plywood blade and a Freud 40 tooth carbide blade on the trim saw.
best circular saw blade for birch plywood Related Question:
What is the best blade to cut birch plywood?
To get the best-quality cuts, invest in an 80-tooth blade designed for sheet goods. The small teeth take little bites to reduce chip-out and are steeply beveled at their edges to score the veneer face. You’ll have to slow your feed rate, but will get a much smoother edge.
What circular saw blade is best for cutting plywood and why?
Best Circular Saw Blade: Ultra Fine Finish With 60 teeth and a . 059-inch kerf, the Freud D0760X Diablo Circular Saw Blade creates clean, smooth cuts on delicate material like veneer plywood and melamine. This thin kerf greatly reduces the chance of chipping and blowouts, and doesn’t waste any material.
What type of saw blade is best for cutting plywood?
For table and miter saws, invest in an 80 TPI plywood blade, one designed for cross (miter saw) or rip (table saw) cuts. Then when making your cuts, set yourself up for success. Your plywood should be oriented so that the blade exits the wood on the good face.
Can you cut plywood with a circular saw?
Circular saws can be used to make square, miter, bevel and compound-angle cuts. When fitted with the appropriate blade, it can even cut metal and concrete. However, there’s one job for which the circular saw is particularly well-suited: cutting large sheets of plywood down to size.
Is birch wood easy to cut?
Woodworking machinery cuts birch with ease, but because of interlocked patterns — grain that turns at 90-degrees — it has a moderate blunting effect on blades.
How many teeth should a circular saw plywood blade have?
Framing blades have 24 teeth and are effective for jobs such as rough carpentry, where speed is more important than getting a clean cut. Plywood blades have 100 or more fine teeth designed to create a finish with minimal splintering.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
What is a 140 tooth circular saw blade used for?
OVERVIEW. The CRAFTSMAN 7-1/4-in 140-tooth carbon circular saw blade is made for cutting plywood, OSB and plastic. With a fully hardened and fully flattened plate, along with 140 precision-ground teeth, this blade delivers precise cuts without chips or splinters in the wood or cracks in vinyl and plastic materials.
What does ATB mean on a saw blade?
ALTERNATE TOP BEVEL. (ATB) Alternate right top bevel and left top bevel. Used on saw blades for general purpose and crosscutting natural wood & veneered plywood.
What do you put under plywood when cutting?
The Secret is 2×2 Foam Board Here I have 8 laid out to support a full sheet of 3/4″ plywood. And unlike full insulation sheets, they are so easy to store. I just stack them up on a top shelf or under my bench.
How do you make plywood straight edges?
Try attaching one of the crooked sheets of plywood to one with a straight edge with a hot glue gun. Run through the table saw, then detach, flip it over and run it again.
How do you square plywood with a circular saw?
Making perfectly square crosscuts with a circular saw is easy, if you guide the saw with a layout square (a framing square or Speed Square will work). Hold the saw in place with its blade right on the cut line. Then slide the square against the saw’s base plate, and press it tightly against the edge of the board.
Is birch plywood hard or soft?
Baltic birch is considered as hardwood but softer than ash or maple. Baltic birch plywood has become popular plywood because of its natural strength. There are several reasons why Baltic birch is considered as a hardwood.
Does Home Depot charge for cutting plywood?
Home Depot will cut plywood for free, provided you have purchased the material from the store. Employees will offer the first 10-15 cuts for free before charging a 50 cent fee per cut. Alternatively, you can purchase a circular saw or rent one for 4-hours, 1 day, 1 week, or 4 hours.
When cutting plywood with a circular saw which side is up?
Also note that a circular saw cuts on the upstroke, which often splinters the top edge (veneer) slightly. The bottom edge usually remains splinter-free. So always cut plywood with the good side down.
