So we’ve summoned all of our wisdom and powers of brevity to bring you this useful guide to choosing the right circular saw blade. Choosing the right circular saw blade for rip cuts might be even more important. We hope this article about choosing the right circular saw blade cuts through the confusion so you can select the best accessory for the job.
Aside from selecting a circular saw blade based on factors like the number of teeth, positive-negative zero saw blades, tip style, and many other factors, you also need to select a saw blade according to the material type you will cut. Choosing a circular saw blade for cutting hardwood can be a bit confusing, given the myriads of brands and models of saw blades in the market today. Since circular saw blades come in different varieties and make, you may get confused about which saw blade to choose for ripping hardwood.
A circular saw blade is a special type of blade that works well with circular saws and is particularly designed to cut through different materials with ease. The circular saw blade is reinforced and strengthened to provide the smooth and optimum performance that you experience from your circular saw, and once the blade inside your saw becomes warped or worn out, you can replace it with a similar one to ensure that you keep getting clean and precise cuts every time you use it. Most of the other blades often get overheated and warped, but this isn’t something you experience with the circular saw blade.
With the best circular saw blade for hardwood, your work will be fast and smooth. Get familiar with the list of the prime blades for the circular saw. Back to menu How to pick circular saw blade for hardwood.
best circular saw blade for soft wood Related Question:
What type of blade works best on soft wood?
Flat-top teeth are used on blades for ripping hard and soft woods. Because wood is much less likely to chip and splinter when it is being cut with the grain, a rip blade is designed to quickly and efficiently remove material.
Is more teeth on a circular saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
How many teeth should my circular saw blade have?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
What is the best type of circular saw blade?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
What is the purpose of the gullet on a saw blade?
Gullet. The space between the teeth and the body of the saw. This space holds the sawdust while the teeth are in the cut. The gullet must be large enough to hold all the sawdust produced.
What is a 60 tooth saw blade used for?
Honorable Mention: 60t or 80t Cross Cutting Blade A good cross cutting blade is designed to provide ultra-smooth cuts going across the grain without splintering or burning. And ultra-smooth cuts equate to better precision and tighter joinery in your projects. Generally, more teeth equals a better cut.
How do you cut a plywood with a circular saw without splintering?
To do so, place the best side (meaning the side of the door that will be most visible once it’s hung) face down. Then score along the edge of the cut line with a sharp utility knife. Now when you make the cut, the wood fibers will break off cleanly at the scored line, leaving a smooth, splinter-free cut.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is a 180 tooth saw blade used for?
Designed for cutting a variety of materials, including plywood, vinyl siding, and plastic, the CRAFTSMAN 10-in 180-tooth high-speed steel miter/table saw blade set is a must-have for your workshop.
How do I know if my circular saw blade is dull?
Look for worn-down, chipped, broken and missing teeth or chipped carbide tips that indicate it’s time to replace a circular saw blade. Check the wear line of carbide edges using a bright light and magnifying glass to determine if it’s beginning to dull.
What is the difference between using a blade with 80 teeth as opposed to a blade with 18 teeth?
Cutting miters is basically crosscutting on an angle, and blades with higher tooth counts generally perform best when cutting across the grain. A blade with 80 or more teeth offers the crisp miter cuts you’re looking for.
Are Diablo blades worth it?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
Are Dewalt circular saw blades good?
Dewalt Circular Saw Blade Despite the lower price tag, it offers great performance to the user for a high value for money thanks to its 7 ¼ inch blade size rating. As for the teeth count, you get a total of 60 teeth that is much higher than even some of the more expensive options out there.
How many teeth does it take to cut a hardwood floor?
The best saw blade for ripping hardwood is a rip blade. This blade is specially made for cutting through wood fibers, so it will cut through hardwood easily and leave a clean edge. Rip blades usually have 10 to 40 flat-topped (FT) teeth, which is a comparatively small number, but it will move through the grain quickly.
