Aside from selecting a circular saw blade based on factors like the number of teeth, positive-negative zero saw blades, tip style, and many other factors, you also need to select a saw blade according to the material type you will cut. Choosing a circular saw blade for cutting hardwood can be a bit confusing, given the myriads of brands and models of saw blades in the market today. Since circular saw blades come in different varieties and make, you may get confused about which saw blade to choose for ripping hardwood.
A circular saw blade is a special type of blade that works well with circular saws and is particularly designed to cut through different materials with ease. The circular saw blade is reinforced and strengthened to provide the smooth and optimum performance that you experience from your circular saw, and once the blade inside your saw becomes warped or worn out, you can replace it with a similar one to ensure that you keep getting clean and precise cuts every time you use it. Most of the other blades often get overheated and warped, but this isn’t something you experience with the circular saw blade.
At first glance, circular saw blades might appear simple. Manufacturer reputation also plays a part in choosing the best circular saw blades. Most miter saw blades measure 10 to 12 inches, while circular saw blades typically measure 7¼ or 6½ inches.
While the saw is ideal for those purposes, you can also use it to make furniture-grade cuts in wood, cut steel or aluminum, reduce unwieldly sheets of plywood to more manageable sizes, and do heavy demolition cuts through lumber that has nails in it. These blades are rated for steel plate, pipe and conduit, and shapes such as L, U, and squares; some blades are also designed for cutting the same shapes in aluminum, and a few blades are even rated for making the cut in stainless steel, a notoriously difficult material to cut. Not all metal-cutting circular saw blades will cut thin sheet materials such a roofing and metal trim.
With the best circular saw blade for hardwood, your work will be fast and smooth. Get familiar with the list of the prime blades for the circular saw. Back to menu How to pick circular saw blade for hardwood.
best circular saw blade for thin wood Related Question:
Is more teeth on a circular saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
What can I use to cut through thin wood?
Utility knives, pliers or even scissors will cut through most thin wood easily.
How many teeth should my circular saw blade have?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
What is a 60 tooth saw blade used for?
Honorable Mention: 60t or 80t Cross Cutting Blade A good cross cutting blade is designed to provide ultra-smooth cuts going across the grain without splintering or burning. And ultra-smooth cuts equate to better precision and tighter joinery in your projects. Generally, more teeth equals a better cut.
How do you cut a plywood with a circular saw without splintering?
To do so, place the best side (meaning the side of the door that will be most visible once it’s hung) face down. Then score along the edge of the cut line with a sharp utility knife. Now when you make the cut, the wood fibers will break off cleanly at the scored line, leaving a smooth, splinter-free cut.
How thin can circular saw cut?
Clamp the pliers to the narrow side of the circular saw base to make rip cuts up to 1½” to 2” wide.
How do you cut thin plywood without splintering?
Naturally, you’ll want to select a fine tooth blade that works well to cut plywood. These tend to have more teeth per inch, as well a higher bevel angle that can slice through the wood. For a circular saw, you can easily pick up a plywood blade for $20 at any home center, and it will work magic on your cuts.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What saw blade for ripping?
Ripping solid wood: Use a 24-tooth to 30-tooth blade. You can use 40-tooth to 50-tooth multipurpose blade as well, but it will take longer. Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well.
Can I use a bigger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
How many teeth should a circular saw plywood blade have?
A 40-tooth blade works fine for most cuts through plywood. Blades with 60 or 80 teeth should be used on veneered plywood and melamine, where the thin veneers are likely to blow out on the underside of the cut, a characteristic known as tearout. MDF requires even more teeth (90 to 120) to get the cleanest cut.
What is the purpose of the gullet on a saw blade?
Gullet. The space between the teeth and the body of the saw. This space holds the sawdust while the teeth are in the cut. The gullet must be large enough to hold all the sawdust produced.
What is a 140 tooth saw blade used for?
OVERVIEW. The CRAFTSMAN 7-1/4-in 140-tooth carbon circular saw blade is made for cutting plywood, OSB and plastic. With a fully hardened and fully flattened plate, along with 140 precision-ground teeth, this blade delivers precise cuts without chips or splinters in the wood or cracks in vinyl and plastic materials.
How do you cut thin plywood?
To cut thin plywood correctly, you need to use a table saw with a blade that has a high teeth count. The more the teeth on the saw blade, the better it will cut plywood. You can also tape down both sides of the thin plywood with masking tape as that will prevent it from tearing or breaking.
How many teeth do you need for plywood?
To get the best-quality cuts, invest in an 80-tooth blade designed for sheet goods. The small teeth take little bites to reduce chip-out and are steeply beveled at their edges to score the veneer face. You’ll have to slow your feed rate, but will get a much smoother edge.
