At first glance, circular saw blades might appear simple. Manufacturer reputation also plays a part in choosing the best circular saw blades. Most miter saw blades measure 10 to 12 inches, while circular saw blades typically measure 7¼ or 6½ inches.
We’ve written about table saw blade height, using miter saws, table saw safety tips, and caring for circular saw blades, but with so many types of circular saw blades available, how in the world do you go about choosing the right one for the job? Even if you know how to use a miter saw like a pro, there are so many blades to choose from. So we’ve summoned all of our wisdom and powers of brevity to bring you this useful guide to choosing the right circular saw blade. The same aggressiveness can be found in a 40-tooth blade when you step up to a 12″ miter saw blade. For a 7-1/4″ circular saw like the Milwaukee M18 FUEL circular saw, a 40 tooth blade or higher will give you a cleaner cut, but you don’t necessarily want to use that for cross-cutting 2×4 lumber on a job site. Choosing the right circular saw blade for rip cuts might be even more important. We hope this article about choosing the right circular saw blade cuts through the confusion so you can select the best accessory for the job. If you’re a Pro and you have a circular saw blade selection tips, add them in the comments below – or join the conversation on Facebook, Instagram, and Twitter.
A circular saw blade is a special type of blade that works well with circular saws and is particularly designed to cut through different materials with ease. The circular saw blade is reinforced and strengthened to provide the smooth and optimum performance that you experience from your circular saw, and once the blade inside your saw becomes warped or worn out, you can replace it with a similar one to ensure that you keep getting clean and precise cuts every time you use it. Most of the other blades often get overheated and warped, but this isn’t something you experience with the circular saw blade.
best circular saw blade for softwood Related Question:
What type of blade works best on soft wood?
iv. Carbide-Tipped Blades: this type works best for softwood, hardwood, composite materials, and chipboard.
Is more teeth on a circular saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
What blade should I get for my circular saw?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
Are Diablo and Freud the same?
Freud and Diablo Background The Freud Group is a global supplier of circular-saw blades, router bits, and cutters for enthusiast woodworkers, professional and industrial users. They produce under both the Freud and Diablo brands.
How do you cut a plywood with a circular saw without splintering?
To do so, place the best side (meaning the side of the door that will be most visible once it’s hung) face down. Then score along the edge of the cut line with a sharp utility knife. Now when you make the cut, the wood fibers will break off cleanly at the scored line, leaving a smooth, splinter-free cut.
What is a 180 tooth saw blade used for?
Designed for cutting a variety of materials, including plywood, vinyl siding, and plastic, the CRAFTSMAN 10-in 180-tooth high-speed steel miter/table saw blade set is a must-have for your workshop.
What is the purpose of the gullet on a saw blade?
Gullet. The space between the teeth and the body of the saw. This space holds the sawdust while the teeth are in the cut. The gullet must be large enough to hold all the sawdust produced.
How many teeth should my saw blade have?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
What is the difference between using a blade with 80 teeth as opposed to a blade with 18 teeth?
Cutting miters is basically crosscutting on an angle, and blades with higher tooth counts generally perform best when cutting across the grain. A blade with 80 or more teeth offers the crisp miter cuts you’re looking for.
How many teeth does it take to rip a hardwood floor?
Rip blades usually have 10 to 40 flat-topped (FT) teeth, which is a comparatively small number, but it will move through the grain quickly.
Are Diablo blades worth it?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
What is a 40 tooth saw blade used for?
General Purpose Saw Blade. Diablo’s general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo’s blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks.
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
