The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm sawradial arm sawInvented by Raymond DeWalt in 1922, the radial arm saw was the primary tool used for cutting long pieces of stock to length until the introduction of the power miter saw in the 1970s.https://en.wikipedia.org › wiki › Radial_arm_sawRadial arm saw – Wikipedia, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.
In this article, I’ll guide you on how to cut 4×4 lumber with ideal sized circular saw. For general infrequent work, you can use your usual circular saw and blade and make several passes. For more regular work it would be best to invest in the right beam saw such as Makita 5402NA 16-5/16-Inch Circular Saw.
If it is your first time purchasing a circular saw and you intend to use it to cut 4×4, you might get confused about which circular saw size is best for cutting 4×4. The sizing of the circular saw refers to the size of the saw blades that fit the circular saw. The size of the diameter of the saw blade will also dictate the depth of cut the circular saw can produce.
Standard circular saws with 7 ¼” blades can only cut 2 ½” deep, so making the cut in a single pass isn’t possible. “A miter saw isn’t always an option though; if you need to cut a 4×4 on the job while you’re installing fence posts then a circular saw is a better option, as it can cut through a 4×4 in 2 or 3 passes, and is far more portable than a 12” miter saw. Line up your saw with the cut line from step 1, slide the blade in the existing groove, and complete the second cut.
Using a new cut line is essential when working with the buzz best saw to cut 4×4. At the time of purchase, do not hesitate to grip the saw to ensure your best hand saw to cut 4×4 and that the trigger is easily accessible, even for left-handed people. With a usually very thin best miter saw to cut 4×4 blade, it is tough to cut a plank by plunging directly into the entire width of the latter.
best circular saw to cut 4×4 Related Question:
What size miter saw Do I need to cut a 4×4?
It shouldn’t be a matter of whether a 10-inch miter saw can cut a 4×4, but rather what miter saw is better suited for cutting 4x4s? The short answer is, you need a 12 inch miter saw.
What is the best way to cut a 4×4 post?
A hand saw will work just fine to cut them and won’t take long or cost much. You could purchase a circular saw and make 2 horizontal cuts, but if you’re not used to using a circular saw, this is a good way to mess up your cuts and potentially remove bits of flesh from yourself.
Can a 7 1 4 miter saw cut a 4×4?
No not with one cut. You would have to turn the 4×4 over. Blade is a 7 1/4″ diameter, same as a hand held circular saw.
What saw will cut a 4X4?
A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
Can I cut a 4X4 with a 10 table saw?
Yes, a 10-inch table saw can cut a 4X4. However, it can not cut it all in one go. It can only cut material that is 3.5 inches thick, so you will have to do it twice. A 12-inch table saw will be able to cut a 4X4 in one go.
How thick can a circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches. Compact saws can use anywhere from 3 3/8-inch blades up to 6 1/2-inch blades.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
Can I put a 12 inch blade on a 10 inch table saw?
The Blade Runner Twelve-inch blades are harder to find, and at a higher price typically at woodworking supply retailers. Theoretically, a 10-inch blade will fit on a 12-inch table saw, but the arbor — or hole in the middle of the blade — is typically smaller.
Which table saw has the deepest cut?
Generally, the maximum cut depth of table saws varies by manufacturer and product design. For most table saws, 4″(101.6mm) is just about the maximum depth for a 90-degree cut. For a 45-degree angle of cut, the maximum depth is 2-¾” (69.85mm).
How deep can a 10 inch circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
How deep can a 5.5 circular saw cut?
It turns out that it’s a simple question but very essential when you are going to do a project using this kind of saw. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
