Take me to the hotel – Baggage gone, oh well …. 10-25-2009, 11:36 PM #5 My bandsaw table is a little higher than elbow height. 10-26-2009, 2:43 AM #6 I like mine slightly under elbow height so I can see the work well but not have to bend my arms upward while working. The drill press table and head are height adjustable.
“I have a ryobi 9” bandsaw and i currently use it on my bench top, which at times is very awkward to use. I want to build a movable stand for it but not sure how high to make it.
Finding just the right work height for your bench and your power tools can make your time in the shop even more enjoyable. A recent post in WoodNet – The optimum height of a woodworker – got me hard at work copying and pasting smart ideas and methods from WoodNetters. “1) Three Tool Height Zones”The are at least three working height zones: Low for power.
Bottom of saw to saw table top is appx 14 1/2 “. Have your say… Forum Topics Woodworking Skill ShareYour woodworking skills are displayed for several lifetimes in each project. Show us your jigs, share your tips, strategies and, of c… 1908 Wood & LumberDifferent wood requires different woodworking strategies – from cutting to finishing.
Here are the standard heights for woodworking machines from “Humanscale 1/2/3″ 46 inch = bandsaw table 42 inch = lathe centers 39 inch = radial arm saw table 36 inch = circular saw table 36 inch = workbench 36 inch = sander table 36 inch = shaper table 33 inch = jointer 32 inch = circular saw table 24 inch = stool or chair for 36 inch work surface No mention of a thinkness planer. These standard heights were developed over time to match the Average american male who was 68.8 inches tall in 1973 when Humanscale was published. Suggestion for calculating your ideal equipment height” Ideal Height = Standard Height x your height / 68.8 This method is based on the assumption that our bodies are proportioned to our height – ie short people have shorter arms and legs, tall people have long ones.
Hi folks , I need some advice on the height a bandsaw table should be from the floor. As people are all different heights , I am guessing there is no legal minimum height , I have looked on the HSE website & others without success. I have asked at work about getting an adjustable stool for our bandsaw , as there are different shifts using it & people of varying heights.
best height for a bandsaw Related Question:
What is the height of a radial arm saw?
Most of the RAS’s I’ve seen on display in stores seem to have a table height of around 42 inches.
What is the most common bandsaw size?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
What is throat depth on a bandsaw?
The throat is the distance from the blade to the vertical frame section of the body of the saw. This distance determines the width of cut that can be completed on the band saw. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.
Can you put a 12 blade on a 10 radial arm saw?
No. A 10 inch table saw is just big enough to accept a 10 in blade. 12 inch blades are too big to fit a 10 inch table saw.
How deep can a 12 inch radial arm saw cut?
Depth of Cut 3” (12” Blade 90 Degree) Depth of Cut 2” (12” Blade 45 Degree) Maximum Crosscut 16” in 1” Material. Maximum Rip 26 3/8”
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
What is a 14-inch bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
Are band saws useful?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
Which way should the teeth face on a bandsaw?
On a typical wood or metal cutting blade the hook or of point of the blade should be pointing down for a vertical blade bandsaw, or for a horizontal blade saw the hook of the teeth should be pointed such that they enter the workpiece first as the blade moves.
Can I put a 12-inch blade on my 10-inch table saw?
The Blade Runner Twelve-inch blades are harder to find, and at a higher price typically at woodworking supply retailers. Theoretically, a 10-inch blade will fit on a 12-inch table saw, but the arbor — or hole in the middle of the blade — is typically smaller.
Can you put smaller blade on miter saw?
Yes you can. The only real difference, besides maximum cutting depth, is that smaller blades are often thinner and have a narrower kerf. I was curious if this could make them unsafe to run at the same speed as a larger blade, but actually the opposite is true.
Can I put a bigger blade on my miter saw?
Can I use larger blades? Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″).
Are radial arm saws obsolete?
If they are used in any other way, no.” Ellis Walentine “In my mind, radial arm saws are not at all obsolete. Although sliding compound miter saws do an excellent job of finish-crosscutting boards up to 12” wide, nothing beats a radial arm saw for crosscutting wider stock and rough boards.