If you plan to use your band saw on a continuous basis for large and heavy gauge wood, metal, or plastic cuts, you should lean towards a larger 18″ band saw. Your depth of cut will help indicate how thick of wood you are able to cut with your band saw while the throat will tell you the distance from the blade to the vertical frame of the band saw. With the help of this guide, you should have a thorough understanding to answer the question of what size band saw should I buy.
Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw. Not only will the owner’s manual help you set up your saw properly, but it will also help you become much more familiar with the proper methods for safely cutting with your saw. A band saw is among the safest of power woodworking tools, but the saw must be set up properly before use.
There are lots of recommendations about the smallest diameter curve you can cut with each blade width, but the simple answer is “The narrower the blade, the tighter the curve.” I generally keep a 3/16 or 1/4 inch blade on the smaller bandsaw I use for “Scrolling” – general curved work. An expert on bandsaw boxes suggested that a 3/16 inch blade seemed ideal. I have seen a 1/8 inch bandsaw blade, but that is so small that conventional bandsaw guides don’t work – there isn’t room for them to hold the side of the blade behind the teeth … replace the side guides with “Cool blocks” or hardwood blocks soaked in mineral oil, and “Bury” the blade in the blocks.
In case you do not own a table saw and want to use the band saw occasionally for ripping short boards, consider a 10″ band saw with a hp motor – it is not fast, but will get the job done. “The minimum blade width for most standard band saw sizes is 1/8″. These very fine blades allow cutting tight curves and have a narrow kerf. The maximum blade width varies with saw size. Most 9-inch band saws take blades up to 1/4″ or 3/8″ wide, 10-inch saws up to ½” wide, 14-inch up to 3/4″ wide, and 18/19-inch saws up to an inch or a bit more. Band saw blade thickness is also connected to saw size: bigger saws are able to take thicker blades than small ones.
There are 9 inch, 10 inch, 14 inch, 17 inch band saws and so on. Overall, the Shop Fox W1706 offers some of the best features that makes it one of the best 14 inch band saws you can get your hands on today. Although it’s a 10 inch band saw, this WEN 3962 band saw comes with a heavy duty stand that elevates it high enough, making it easier to use.
They just found the bandsaw to be a huge time & effort saver, and their bandsaw was the power tool that scared them the least. Yes, 14-inch bandsaws can be modified with a riser block to allow resawing, but larger bandsaws like this 17-inch bandsaw have a stronger frame, stronger guides, a larger cast iron table, and more importantly: more power. At 2 Horse Power this bandsaw has plenty of power for me to rip through most any thickness of lumber that comes into my workshop, and has a wide 17-inch opening for when I’m cutting really wide boards.
best size bandsaw for woodworking Related Question:
What size band saw do I need for woodworking?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
How do I choose a bandsaw for woodworking?
The two main things to consider when choosing a band saw are the depth of cut and the throat. The saw’s depth of cut is the distance from the table to the upper blade guides. Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw.
Is a 14 bandsaw big enough?
Re: Bandsaws: 14″, or is bigger better? If you are not going to do any resawing, then a 14″ will do just fine. If you may be cutting out bowl blanks for a lathe, then you should consider a riser to get more vertical clearance.
What is a band saw used for in woodworking?
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials.
What does a 14 inch bandsaw mean?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What size bandsaw is best?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
Are band saws useful?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
Is 1 hp enough for a bandsaw?
1 Horespower is a lot of power, it is aproximately 50% more work than a horse can do on a long term basis, and aproximately 6 times what a person can do. A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
What is the size of a band saw?
The size of a band saw is given in inches, with 14-inch being the most common. The size refers to the distance between the blade and the saw’s throat, or the column that supports the upper wheel. Band saws range in size (and price) from 10-inch benchtop machines to 24-inch freestanding ones for professional shops.
What is resawing on a bandsaw?
Bandsaw Resawing from the beginning: resawing is cutting a sawn plank of wood into thinner planks on a bandsaw. Thus the cut runs through the plank’s width, which distinguishes bandsaw resawing from ordinary bandsaw rip cuts where the blade runs through the stock’s thickness.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
What size blade does a 14 inch bandsaw take?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
What is the difference between a band saw and a scroll saw?
Now, one of the really big differences is that the scroll saw’s blade moves up and down, whereas the band saw’s blade moves in a continuous downward motion. Band saws also differ in the thickness and size of materials which they can handle.