Hi Patrice and everyone, I am a Lenox dealer and would be happy to send you what you need where ever you are, The blades are $10.20 each, I stock both 10/14 and 24 TPI and will only charge you the actual shipping charges. Many of you will have closer dealers than me but I am happy to help any way I can.
You must select the correct Teeth Per Inch for the thickness of material you are cutting. That’s why Dakin-Flathers have created this useful bandsaw teeth per inch chart. Use the bandsaw teeth per inch chart below to select the optimum TPI for your project needs.
01-17-2016, 10:18 AM #4. 01-17-2016, 10:59 AM #5. 01-17-2016, 11:45 AM #6 With a portaband when your blade is coarser than optimal you can angle the blade to the work so the work appears thicker. The biggest factor in blade life on a portable is quality, I’ve tried every blade manufacturer out there over the years. “One other tid bit. I make my own saw backstop for placing up against the work. The one that came on my saw was flimsy bent sheet metal and only supported stock on one side of the cut. I use a piece of 1/4 x 1 1/2” band iron with a kerf for the blade and a little longer than the stock unit.
Basically, should you cut a lot of thin material, a high TPI number is appropriate. Like 0.063 thin material, 32 TPI or higher should be used. I can suggest a 601 Haltbar bi metal 14 TPI bandsaw blade for your material.
Ideally there should be between 2 and approximately 10 teeth in contact with the material at all times. Generally, choose fewer teeth per inch for thicker materials and more teeth per inch for thinner materials. 18tpi seems to be the happy medium for EMT, strut, threaded rod, etc.
You saw the title, Portable Bandsaw Blades, and decided that’s an article worth reading, you’re my kind of people. While Milwaukee has been the leaders on the tool side, MK Morse and Lenox have been more popular on the actual replacement blades with standard bi-metal and high performance options like the Lenox Wolf-Band or MK Morse Cobalt 811 band saw blades. In this test both Lenox was only able to complete this cut 7-8 times on average before the blade needed replaced, Milwaukee Extreme Bandsaw Blades 26-28 cuts.
As we always say, your bandsaw needs the best bandsaw blades to perform these tasks well. These blades are general-purpose blades for everyday bandsaw use. Bi-metal bandsaw blades cut through harder materials like stainless steel, nickel and titanium.
To get the best out of your DeWalt production metal cutting band saw blades, analyze your sawing application. The third step to get the best out of your DeWalt band saw blade is to make sure the blade and TPI chosen is available in the required blade width. DeWalt Band Saw Blades.com recommends checking your speed and feed rate for your band saw blades cutting different types of material with our bi-metal blades, adjusting band speed for different sized materials, different fluid types and different heat-treated materials.
best tpi for portable bandsaw Related Question:
How many TPI does a bandsaw blade need?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What TPI is best for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What TPI is best for cutting wood?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
How do you measure a TPI on a bandsaw blade?
To avoid stripping teeth, always have a minimum of three teeth in the work surface How to measure TPI: Measure 1 or 2 inches along the blade from the center of the gullet. Count the number of teeth in that space. This is the TPI.
What does TPI mean on a bandsaw blade?
You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.
What is stainless steel TPI?
A blade has a minimum of 2-3 TPI per inch. When cutting harder materials like stainless steel it is recommended to use one pitch finer than you would use on mild steel.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
What TPI is a fine tooth saw?
Blades with 12 or more TPI are typically labelled as fine-toothed saws.
What width bandsaw blade is best for Resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
What does 32 TPI mean?
TPI is an acronym for Teeth Per Inch and is a common measurement to be detailed on saws. As a general rule, the more teeth per inch a saw has, the neater the finish will be, but the slower the saw will cut. The fewer teeth per inch, the faster the saw will cut but the rougher the finish will be.
What is the correct depth setting for a portable circular saw?
For efficiency and safety, set the blade depth no more than 1/4-inch below the thickness of the board.
What is 24 TPI for cutting?
Blades with a low TPI deliver faster cuts with rougher edges and are ideal for cutting wood. Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades.