“To use”Z-clip” fasteners to secure tops to tables, desks, and dressers, you typically saw a blade kerf along the rails or aprons. To avoid any potential weakening that might result from the full-length kerf, cut slots with your biscuit joiner where the fasteners will mount. Set the joiner for the No. 10 depth slot, adjust the fence to cut the proper distance from the top of the rail, and plunge the blade.
2″ Seat Z-clips and buttons fully into end aprons Side apron spacing approx. 20″ Wood moves across the grain Side Apron End apron Set back from side apron to allow wood expansion Angle figure 8 fasteners on side apron flathead screw. To locate the apron slot, measure the offset of the clip, and then add 1⁄32″, which will ensure that the clip pulls the top tightly to the apron.
biscuit joiner z clip Related Question:
Are biscuit joiners worth it?
Biscuits joints serve best as a quick and easy way to keep glue-up parts in alignment, and that they add appreciable pull-apart to strength joints that would be otherwise too weak to stand on their own – like butt joints and miter joints.
What is the difference between a plate joiner and biscuit joiner?
A plate joiner is the same as a biscuit joiner and are used to create an oblong hole in two matching pieces of wood. After the joiners have created the hole, a biscuit is glued, inserted and typically clamped until the wood is dried.