Product 1: 12 Amp router motor – This motor has a lot of power and can be set to run at different speeds, so users can move smoothly along cut lines.
Product 1: A speed dial that can be set to change how quickly it runs (8000-25,000 RPM).
2 inches in the sub-base.
Threaded holes on the fixed base allow it to be attached to a router table in the common 3-hole pattern.
It now comes with the RA1161 fixed-base with a system for changing the height of a bit from above a router table.
No. 2: A precision-machined, sharp YG8 tungsten carbide blade makes clean, accurate cuts on all types of wood, and it’s very durable against heat.
Product 2: Hardened alloy steel main construction with a power coating finish for long-term durability and strength.
It comes with a 1/4-inch universal shank that fits all kinds of routers. It has an enclosed bearing roller for smooth and aligned operations.
Product 2: It comes with a wooden index case that makes it easy to store and organize things.
The Bosch 1617EVS 2.25 HP Electronic Fixed-Base Router has a motor that runs on electricity.
At no load, the Bosch 1617 EVS router can go from an 8,000 to 25,000 RPM speed. This is 12 amps. It has a unique precision centering system that makes cuts that are accurate and consistent at any depth setting. The router has a microfine bit depth adjustment with a re-settable indicator ring and a variable sub-base that can be moved around. The router is strong, lightweight, and made of all magnesium. For accuracy and long bits, it has a precision self-extracting clamp system, a quick templet guide change lever, and a one-piece armature shaft. It can hold 1/4 inch, 1/2 inch, 3/8 inch, and 8 mm.
Feature.
2-1/4 horsepower, 12 amp motor, 8,000 to 25,000 rpm: this is the most powerful in its class. It’s also the fastest.
Work at a speed that’s right for the job and the project.
Coarse and fine adjustment system with a depth indicator that can be set again.
Constant-response circuitry keeps an eye on and maintains the desired rpm for consistent performance.
Large 3-3/4-inch base opening plus a 2-inch sub-base opening can hold big bits, like drills and saws.
Precision-centered design: This is the only one that can do this.
Magnesium construction, which is strong and lightweight.
It doesn’t matter which way you put the switch and cord.
A one-piece armature shaft for precision and a long shank capacity for long bit.
Classic wood handles.
Specification.
In this case, the voltage was 120 volts.
Twelve amp.
It can make 2-1/4 horsepower.
: 1/4 inch, 3/8 inch, 1/2 inch, 8 mm.
8,000 to 25,000 rpm at no load.
The base is 6 inches wide.
Weight: 7.7 pounds.
Include.
The 1/4-inch S.R. chuck has a 1/4-inch S.R.
chuck with a 1/2-inch S.R. colla.
A 16mm shaft wrench.
Wrench for the collar nu.
There is a chip on the shield.
Warrant.
When you buy this Bosch power tool, you get a one-year limited warranty from the date that you bought it.
There are two 1/4-inch and 1/2-inch collets in the Bosch 1617EVS wood router tool set. It has a fixed base hand router with 12 amps and two 1/4-horse power. There is a hard plastic case inside of this on. It’s double insulated.
Tungsten Carbide Router Bits by Hiltex 10100. A 15-piece set.
In this case, the solid carbide flush trim “As long as you have a ball bearing. It’s the Flush Trim Bit that’s 1/2″ long. The Corner Round Bit is 3/4″ long. The 45DegreeChamfer Bit is 1/2″ long. The Cove Bit is 1/2.” “In this case, I would say.
In the Bosch router table, it was put in. I used the hex wrench that came with the table to adjust the height above the table. When the “C” ring came out of its groove on the adjustment tool, it broke. Reset the ring and it wouldn’t stay in place. This is a bad way to make things. Returned and bought a similar model from DeWalt.
