Product 1: Ergonomic Handles with Softgrip: Provides improved comfort for all-day use by reducing fatigue.
Product 1: The Hammer Tube Design Dissipates Heat: The flutes on the hammer tube act as a radiator, dissipating heat that has accumulated inside the instrument.
1st Product: New Motor Design: Increased motor output power results in an increase of up to 30% in impact energy over the BH2760 model.
1st Product: Non-slip Rubber Cover: Helps to prevent accidental tipping.
Product 2: This product is ideal for starting holes in concrete slabs as well as general chipping work.
Product number two: the boiling poin.
Product 2: General chipping and chiselling wor.
Product 2 measures 20 inches in length overall.
Bosch BH2770VCD 120-Volt 1-1/8 Hex Breaker Hammer Brute Turbo Deluxe Kit (BH2770VCD 120-Volt 1-1/8 Hex Breaker Hammer Brute Turbo Deluxe Kit.
The Bosch BH2770VCD Brute Turbo Breaker Hammer has the highest rate of concrete removal in its class, which is remarkable considering that it weighs only 63 pounds. Because it produces 1,000 BPM and 43 Ft.-Lb. of impact energy, this tool is capable of handling heavy-duty applications such as outdoor asphalt work or indoor foundation removal and replacement. When used with the included deluxe cart, the breaker hammer is fully mobile and does not require a compressor. It can be powered by any 115/120V AC or DC outlet, 15 Amp outlet, or 2,500-watt portable generator. The Active Vibration Control system incorporates a longer air cushion in the hammer mechanism, which significantly reduces vibration levels at the source of the vibration. A complete vibration control system is completed by shock-mounted handles, which allow contractors to work at the lowest vibration levels possible while not increasing the size or weight of the tool.
A 20-inch Moil Point 1-1/8-inch Hex Hammer Steel from Bosch, model HS2161.
It is an unstoppable secret weapon for starting holes in concrete slabs, as well as for general chipping and demolition work, and Bosch’s 20″ x 20-1/2″ moil point is no exception. Bosch’s Moil Point, which has a 20-1/2-inch shaft reach, penetrates deeply into concrete, asphalt, and other tough materials, giving you the advantage in demolition projects.
FEATURE.
Starting holes in concrete slabs with a sharp, long-lasting point is a common task.
Excellent for chipping and demolition work in general.
20-and-a-half “the total length of th.
SPECIFICATION.
20 1/2 inches in total length.
Concrete chipping is used in a variety of applications.
1-1/8 In. hex hammer steel points and chisels are available from Bosch in a variety of sizes. Bosch is constantly innovating in the field of concrete and masonry drilling, increasing efficiency while also increasing durability. This bit has a 20-1/2-inch shaft reach, which allows it to penetrate even the most difficult materials.
One chisel was missing from the product when it was delivered. When I contacted the vendor, I was told that a replacement would be sent. When I took it to the jobsite for the first time, I discovered that it was defective and would not turn on at all. It was a huge let down. The same outlet worked perfectly with another brute that I have, which I tested on the same outlet. I’m not likely to purchase another power tool through Amazon in the future. As a result, I have to go through the return process, worry about repackaging it without the original box, and drop it off at the UPS distribution center. What a complete waste of time!
