Dust extractor design that is mobile and can be used with the Bosch cordless gbh18v-26d bulldog is built to provide maximum mobility.
Users will be able to move closer to OSHA Silica dust regulation compliance with the help of this heap filter.
– Available in 5/8 in. and 1 in. diameters. – Two dust-eyes and a 4 in. extensio. Sizes suitable for use with bits ranging from 5/32 in. to 1 in. In diameter, with a maximum length of 10 in. In terms of lengt.
Aluminum guide rail – this railing is made of aluminum. Retraction of the dust eye is smooth and uninterrupted during the drilling applicatio.
Container for dust contains enough material for up to 20 holes to be drilled into concrete with a 1/2 inch diameter bit that drills 2 inches deep.
Dust control – reduces the amount of harmful airborne silica dust in the air and the amount of labor required for dust cleanup.
Compatible with Bosch 2KG D-Handle Bulldog hammers – designed to fit 1 in. 11255VSR, 1-1/8 in. GBH2-28L, and RH228VC corded models, as well as the 1 in. 18V GBH18V-26D cordless model – as well as the 1 in. 11255VSR, 1-1/8 in. GBH2-28L, and RH228VC corded models.
The BOSCH 18V D-handle Bulldog can be used in conjunction with this 18V mobile dust extractor to provide users with maximum mobility around the jobsite while also providing a dust-extraction solution. With the 18V 1 inch GBH18V-26D In-Line Bulldog Rotary hammer and the GDE18V-26D Mobile Dust extractor, you can achieve a true cordless solution for your dust extraction needs. It is also compatible with the legendary corded 1 In. 11255VSR rotary hammer, as well as the 1-1/8 In. GBH2-28L and RH228VC Bulldog rotary hammers, both of which measure 1-1/8 In. Powered by an 18V battery from BOSCH, this attachment is portable (sold separately). It is equipped with a HEPA filter, which assists users in achieving compliance with OSHA silica dust regulations. It contributes to the reduction of harmful airborne silica dust as well as the reduction of labor required for dust cleanup after drilling. The attachment is supplied with two Dust-Eye options (one small and one large) as well as a 4 In. extension. It is possible to use bit diameters up to 1 inch in diameter and bit lengths up to 10 inches in length with the large Dust-Eye and extension. When drilling, the extractor is equipped with an aluminum guide rail to ensure long-lasting durability and smooth retraction of the Dust Eye. The dust canister capacity can accommodate up to 20 holes drilled into concrete with a 1/2-inch diameter bit and a 2-inch depth of penetration.
