RatingLet us know what you think about the Bosch PWS 700-115 Angle Grinder by leaving a product rating. Angle grinders are most suited for use on metal or stone. Although the amount of noise produced by an angle grinder can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage.
bosch pws 700-115 angle grinder discs Related Question:
Do all discs fit all angle grinders?
Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder.
When should I replace my angle grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
What is the most common angle grinder disc size?
The two most common disc sizes are 4.5” (115mm) and 9” (230mm). Grinders with larger discs are particularly well suited to heavy-duty applications, whereas those with smaller discs are ideal for finer work.
Are Bosch angle grinders any good?
Bosch does good work for a good price. This is a basic angle grinder that will let you use those thin cutting wheels. The included wrench makes wheel swapping quick and easy. There’s an appropriate guard, and a handle, for safety purposes.
What is the difference between 115 and 125 grinder?
All in all, 125mm angle grinders are extremely versatile tools despite their limited cutting depth of just 38 mm. While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
How long do angle grinder discs last?
1 – Cutting and Grinding Discs Have Expiry Dates. Usually expressed as a month and year, such as 03/2018, these expiry dates are printed to comply with the manufacturing regulation, EN12413:2007+A1. This date is generally printed on the centre ring and is at a maximum three years from the manufacture of the disc.
What is the worn out diameter of a grinding disc that needs replacement?
Do not use grinding wheels when worn less than ½ of their original diameter. Replace the wheel when worn to ½ of the original diameter. When the grinding wheel is worn to the paper washer it should be replaced. 10.
How do I know if my grinding wheel needs dressing?
When the sharpness of grinding wheel becomes dull because of glazing and loading, dulled grains and chips are removed (crushed or fallen) with a proper dressing tool to make sharp cutting edges and simultaneously, make recesses for chips by properly extruding to grain cutting edges.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
How do I choose an angle grinder disc?
depends on the type, shape and thickness of the steel that needs to be cut. For standard everyday jobs on either stainless or mild steel using an angle grinder, choose a 1mm or 1.6mm thickness in your disc. For projects that involve thin metal such as sheet metal, choose a 1.0mm or 0.8mm thinner cutting disc.
Where are Bosch grinders made?
Talked to the Fein rep the other day and their grinders, tools are made in Germany as well.
How many amp angle grinder do I need?
Five or six amps is common on mid-range angle grinders, but some are as high as 11 amps. Larger models can reach 14 amps, which is a practical limit since standard electrical outlets only provide a 15-amp maximum supply. Some heavy-duty angle grinders use horsepower instead.
Can grinder cut concrete?
Concrete cutting is a common task at the construction area, such as cutting concrete floor, concrete wall, concrete slabs and concrete pavers. Although the various concrete cutting saw is available, an angle grinder is the most convenient tool for small concrete cutting work.
What is the difference between a disk grinder and an angle grinder?
The most significant difference between the two is the fact that Disc grinder is a solid piece of machinery, whereas an angle grinder is a handheld and portable in nature. Also, an angle grinder is used for rough cutting and grinding, whereas a disc grinder is usually used for precision work on smaller workpieces.
What is Arbor size on angle grinder?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).