The sliding nail gun drives nails with wire welds and plastic coils inside of them.
The siding nailer has an adjustable depth guide that makes it easy to set nails at the right depths quickly and easily.
The coil siding nailer is made of aluminum, which is lightweight but strong.
The soft rubber foot helps to keep soft woods from getting scratched.
The tool-free adjustable exhaust makes it easy to move the exhaust away from the user.
The length of the fastener is 1-1/4-inch to 2-1/2-inch; the diameter is.080-inch to.092-inch.
Product Description: Nailer Styl.
To use this 15-degree Coil Siding Nailer, you’ll need to use wire weld and plastic-filled coil nails. When you use this roofing nailer, you can do it quickly and easily to set nails at the right depth. Depend on this 15-degree Roofing Nailer if you want to build a lightweight and durable house.
Amazon.co.
With the powerful and precise Bostitch N66C-1 Coil Siding Nailer, you’ll be able to nail down your siding in no time at all. This small tool is made of aluminum, which makes it strong enough to keep up with all-day use. Adjustable nails and a rubber foot let you work with a wide range of siding materials, from soft woods to other types of siding. The N66C-1 Siding Nailer can be used with any air compressor. It has a tool-free adjustable exhaust that moves spent air away from you when you’re working, so you don’t have to worry about it.
With a range of siding materials, from soft wood to steel, this tool works with them all.
There’s a good chance that the N66C-1 will be able to do the job, no matter what kind of siding you have. This nailer can use both wire-weld and plastic-inserted coil nails, and it comes with a soft rubber foot that’s great for working with soft wood, like pine. The N66C-1 can also handle the hard stuff: cement, clapboard, fencing, and even light-gauge steel aren’t a problem for the machine.
The N66C-1 has a guide that can be moved and a range of 70 to 120 PSI, so you can set the right depth for the job. There’s also enough power to drive nails 1-1/4 inches to 2-1/2 inches with the N66C-1. Also, the N66C-1 has a 350-nail magazine, so you can do a lot of work with one load.
The N66C-1 Siding Nailer can be used with any air compressor. It has a tool-free adjustable exhaust that moves spent air away from you when you’re working, so you don’t have to worry about it.
It has a lightweight, durable design that can be used every day.
Finish the job without getting tired. The N66C-1 Siding Nailer is made of aluminum, which means it is light enough to use all day and doesn’t get in the way. If you need a nailer that is small and light, this one is perfect. It has dimensions of 3.25 by 12 by 11.25 inches (WxHxL) and weighs just 4.9 pounds.
The Bostitch N66C-1 Coil Siding Nailer comes with a seven-year limited warranty, but it’s not covered by the warranty.
Bostitch: I want to talk about this.
Stanley-Bostitch makes high-quality, cutting-edge fastening tools and fasteners for industrial, construction, and home-improvement projects. In addition, there are pneumatic staplers and nailers and compressors. There are also manual staplers and tackers and coil-fed screw systems. There are also rivet tools and glue guns. Many of the products are firsts in the industry.
What’s inside the box.
A nailer for the outside of the hous.
Surprisingly, this tool doesn’t have enough power to drive nails into the side of the house. If I use Bostitch 2 1/2-inch siding nails at 110 PSI with the depth set to as far down as it goes, well over half of them come out a half inch or more. I’m trying to attach OSB to kiln-dried Douglas Fir with 7/16ths of an inch. The wood should be easy for nails to get into because it’s been dried. It doesn’t matter how much I lean on the gun to keep it from firing back. Most of the nails still need to be finished with a hammer.
After a lot of use, I added one star.
After a lot of use, we’ve added this. I’ve just used 500 1 3/4 inch ring shank nails to attach Hardie Plank siding to the same structure: 5/16 Hardie Plank, 1/2 OSB, and KD Doug Fir studs. It worked just fine, though. If you keep the nails at least 2 inches long, this gun should work. They lied a little when they said it could drive 2 1/2-inch siding nails with this tool.
The gun doesn’t seem to be broken in any way, the nails move in the right direction, and the trigger (sequential) works very well. A full-sized nail can’t be pushed into wood by this gun.
