For use with the n66bc-1 cap nailer and the sb150slbc-1 cap stapler.
1-inch plastic caps keep insulation like felt, house wrap, and foam board from pulling through.
Putting nails in by hand takes a lot longer than the cap method, which is 10 times faster.
An overview of what this item is abou.
There are 1 plastic cap. When installing felt, house wrap, and foam board insulation, there is no risk of pulling through. If you have a BOSTITCH cap stapler, you can use this one with a 5/16″ crown and 18 GA wire. Nails and a BOSTITCH cap stapler n66bc-1 (sku 172-6561) with 15-degree Coil Siding Nails are needed for this project.
There is a Manufacturer.
In this case, Bostitch sold 1000 caps for the Bostitch SB150SLBC-1 Cap Stapler.
Following my experience with both Bostitch and Hitachi cap staplers, I can say without a doubt that the Bostitch caps are better than the Hitachi ones. Because they work in Bostitch cap staplers without a hitch, they are easy to load, and they are cheap. It’s not only that the Hitachi caps sometimes fall through, but sometimes they don’t come off the roll very quickly. The Bostitch caps never break through and are stacked on top of each other on the stick.
You can put a stick in your nail pouch and cut off individual caps to use with a staple gun. This is the most important thing I have found so far. Cap staplers don’t always fit where you want to staple things, but smaller guns like this one will often work better. This is especially useful when you need to hang insulation in a small space. By holding a cap in place when you staple, you can keep the staple from going through the insulation’s back. (Of course, when the staple gun’s nose is on the cap, you want to move your finger before you pull the trigger. The Bostitch caps can also be used with brads, so you can use them on your projects. They are just made of a more durable plastic than roll caps, which are made of soft plastic.
If you use the Bostitch caps, you won’t ever have a staple come through. Because they are a little more expensive than roll caps, they are a better deal in the long run. Especially if you need to keep a staple cap in place when you use a staple or brad gun.
If you have a Bostitch cap stapler, these caps are the only ones you can use on your machine. If you don’t have a cap stapler, you can still use these caps with any staple gun and they will work just fine. The best staple caps you can buy in any case are the ones you can buy from us.
