Driver Bits made by CAMO are made for use with the Pro, Pro-X1, and Pro-NB Guides and Edge Deck Screws.
You can use this 3-inch CAMO Driver Bit with a high shoulder when you’re putting in grooved deck boards.
Driver Bit has a T15 Star Drive.
It has a built-in shoulder that sets the automatic depth of drive for the best holding power and prevents overdriving.
It’s best to install at 2500 RPM.
National Nail Corp. is at 345089. You can use Torx Drive Grooved Board Power Bits Camo #15 2 Pack to hide fasteners. Bits with a high shoulder make sure that the camo trim head screws are always driven to the correct depth. Grooved deck boards are ideal for this.
To use the Camo hidden deck fasteners, you need a No. 15 Torx driver. They only come with one. There are a lot of Torx bits in my house. When the Camo one broke, I found out that only a long Torx bit will work with the Camo Marksman system, and that normal Torx bits with extensions won’t even touch the screws when they’re inserted into the Marksman system. You might be able to get these for less at a big-box store. Make sure you have at least two of them on hand, because if the one that comes with the screws breaks, you won’t be able to do anything.
