“The manual for the Wilton Tradesman 14″ bandsaw recommends 3000sfm for cutting 4″ thick T-6 aluminum with a bi-metal blade and no lubrication. Cut through 1” thick aluminum with no problem at all, beautiful cut. Just take a close look through the package at the blade weld on the particular one you buy.
I cutting both steal and aluminum with my band saw in this video and use a wood blade to cut cut the aluminum. Thickness of metal to be cut Blade Teeth per inch 1/8″ to 1/2 inch thick 18 3/32″ to 1/8 inch thick 24 Thickness of metal to be cut Blade Teeth per inch 7/32″ to 7/8 inch thick 3/16″ to 5/8 inch thick 5/32″ to 3/8 inch thick 10 14 18. A band saw also makes the smoothest cuts and, with the appropriate blade, can be used to cut materials other than wood, including metal.
10-24-2017, 10:13 PM So, I need to cut a piece of aluminum, a block actually that is something like 4 inches high and 2 inches thick, and I’m wondering if there is anyway to safely use my Delta 14 inch wood bandsaw. I need to cut a piece of aluminum, a block actually that is something like 4 inches high and 2 inches thick, and I’m wondering if there is anyway to safely use my Delta 14 inch wood bandsaw. Posts: 6,639.Threads: 0.Joined: Sep 2001 Location: Murfreesboro, TN. “AND some sort of lube. I’d probably use a very light oil, maybe 3n1.” NO, I wouldn’t- sorry fellas, had a senior moment…do NOT oil the blade on a 14 Delta bandsaw…the blade will start popping off the wheels…. Sorry…. One day, Chuck Norris ordered two pizzas to go.
10-28-2018, 02:10 PM #1. 10-28-2018, 02:25 PM #2 The saw will cut aluminum without issue, other than that the aluminum will likelyy get hotter than it might otherwise, assuming that you will be running the blade at wood-cutting speeds. Just FYI, if you have a decent table saw, that is perfectly fine to use for aluminum as well, with a good quality non-ferrous blade and stick lube. 10-28-2018, 04:55 PM #7. 10-28-2018, 05:04 PM #8. And just FYI, if you have a decent table saw, that is perfectly fine to use for aluminum as well, with a good quality non-ferrous blade and stick lube.
I cutting both steal and aluminum with my band saw in this video and use a wood blade to cut cut the aluminum. Thickness of metal to be cut Blade Teeth per inch 1/8″ to 1/2 inch thick 18 3/32″ to 1/8 inch thick 24 Thickness of metal to be cut Blade Teeth per inch 7/32″ to 7/8 inch thick 3/16″ to 5/8 inch thick 5/32″ to 3/8 inch thick 10 14 18. A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces.
can a band saw cut aluminum Related Question:
What saw to use to cut aluminum?
Most grades of aluminum offer excellent work ability and weldability, making them suitable for a wide range of applications. The preferred way to cut this material is with a miter saw but a circular saw still works.
Can you cut metal on a band saw?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
What can cut through aluminum?
These low-cost options include hammer and chisel, compound snips, or hacksaws. Green or red metal snips, or hand shears, can cut sheet along curves as well as straight lines, but they will distort both edges when making internal cuts on a piece of aluminum sheet.
What materials can band saws cut?
Bandsaw blades come in a variety of sizes and tooth counts (teeth per inch, or TPI). This enables bandsaws to cut wood, metal, and plastic. Any of these materials can be cut by moving them along the bed of the saw, with or without a fence, guiding the material through the blade along the lines and shapes marked.
What is the difference between a wood band saw and a metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
Can a band saw cut stainless steel?
Bi-metal band saw blades cover the broadest range of sawing applications. 95% of companies and individuals cutting the following materials should use a bi-metal band saw blade: carbon steel, tool steel, structural steel, stainless steel, pipes/tubing, die steel, angles, flat stock and mixed metal applications.
Can a bandsaw cut hardened steel?
The best carbide band saw blade for cutting induction hardened shafts, linear bearing shafts, and case hardened materials up to HRC 65. Surface hardened component cutting has always been extremely difficult to cut. Previously, the best option was using an abrasive wheel.
Can Diablo blade cut aluminum?
Diablo’s Aluminum saw blade series is ideal for corded and cordless saws when on-the-job cutting non-ferrous metals such as aluminum extrusions, copper pipe, brass plate, etc.
Can carbide-tipped blade cut aluminum?
You should be able to use a carbide-tipped abrasive cutoff wheel for non-ferrous metals like brass, aluminum, copper or lead. Carbide-tipped blades last up to 10 times longer than regular steel ones.
What kind of saw will cut metal?
Circular Saw with Metal Cutting Blade or Metal Circular Saw Roofing, sheet metal, and corrugated metal—basically any metal that generally requires just a simple, straight cut—can be cut by a circular saw with the right blade.
What is a bandsaw good for?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
What is the difference between a table saw and a band saw?
Instead of the solid, circular plate of steel with carbide teeth on a table saw, the blade of the band saw is exactly that—a narrow, flexible band of steel with teeth formed along one edge. The band saw blade is stretched and driven between two or three wheels.
What’s the best way to cut aluminum?
Use a wood-cutting saw with carbide-tipped blades to cut most aluminum. Select a fine-toothed blade and don’t cut aluminum with a wall thickness of more than 1⁄4 inch (0.64 cm). If possible, choose a saw blade that creates narrow kerfs (the notch or slot made by the saw).
Will a ferrous metal blade cut aluminum?
Ferrous metal blades can be used for cutting all types of metal construction products including steel siding, roofing, steel studs, and other construction steel. Non-ferrous metal blades are designed for cutting products such as aluminum, aluminum trims, copper and brass.
Can I cut wood with aluminum blade?
Aluminium is relatively soft as metals go, and by comparison many woods although softer are weirdly more wearing of cutting edges. Also, clearance angles are different so it’ll cut some wood or board materials well and others much more poorly but this is also true of some wood blades!