A question I sometimes get is if you can run a chainsaw without a chain. It is not recommended to run a chainsaw without a chain. You can run a chainsaw without a chain but try to do that just for a few minutes.
Running a saw without the bar and chain could possibley cause the clutch and drive sproket to go flying off. Safety wise a chainsaw without the chain is still VERY dangerous. Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction.
Swinging around that saw gets real old in a hurry, not to mention the fumes/exhaust the engine gives off, those aren’t good for ANYBODY.The bar is thin enough to do some major damage/injury to people and property when you get to swinging it around. That first injury, and the lawsuit that comes with it, will be for more than your haunt will make for many years combined, not to mention that you won’t be able to get insurance or permits to carry on. The surround-sound will disorient the guests as to where they are being attacked from, adding to the element of surprise, and the fiber optics sprouting from the bar will appear to be sparks without the chance of fire or burns.
can a chainsaw without a chain hurt you Related Question:
Can a chainsaw cut a person?
Flesh is no match for a chainsaw, it could probably cut through it pretty much forever without wearing out. Bones may be slightly tougher, but they are rigid and a chainsaw will likely be able to cut through them without much problem – though it will probably dull the blade more than wood.
What happens when the chain comes off a chainsaw?
If the chain itself has broken teeth or does not fit back into the rails once it has come off, it will likely need to be replaced. Some chains can be repaired from this type of damage with a flat file.
Can a chainsaw chain fly off?
Chainsaw chains come off the bar due to worn-out bars, worn-out sprockets, and wrongly set tension. You should also note that with continued use, chains lose their tension and hence are more likely to come off the bar when you least expect it.
What are the dangers of a chainsaw?
Be aware of main hazards of chainsaw use – kickback, hearing loss, vibration disease, and CO poisoning.
Can a chainsaw cut bone?
Yes, but it’s VERY messy. A chainsaw is basically a handheld cross-cut saw, designed to cut against the grain, A hacksaw, or even a ripsaw, would be a better tool, though obviously not as fast. Their smaller teeth mean less damage to the bone, and less flinging of bits… Chainsaw cuts bone just fine.
How long does a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Do chainsaw chains stretch over time?
It’s perfectly normal for a chainsaw chain to stretch after regular use. But, if you allow your chainsaw to become too loose, it can easily come off and pose a dangerous situation for you. A chainsaw chain stretches and loosens from tension and extreme friction.
Why is my chainsaw throwing the chain?
Too much slack in your chain can cause the saw blades to jump the bar. This is commonly referred to as throwing the chain. Even if your chain saw is not throwing its chain, the tension might not be correct.
Why did chain pop off chainsaw?
The main reason the chain jumped off in the first place is usually too loose chain tension. During use of the saw, it is normal to have to retighten the chain tension from time to time, failure of this will cause the chain to jump off.
Why is my chain on my chainsaw loose?
Chain Not Set Properly One of the most common reasons why your chain might be coming loose is because it was not set properly. When you go through the steps to tension your chain, you need to finish those steps by setting the tension so it won’t change as you work your saw.
How do most chainsaw accidents happen?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
How common are chainsaw accidents?
They can also quickly cause severe injury or death. According to the Centers for Disease Control and Prevention (CDC), approximately 36,000 people are injured by chainsaws annually. Medical costs for chainsaw injuries based on these facts amount to about 350 million dollars per year.
Where do most chainsaw injuries occur?
Approximately 40 percent of all chainsaw accidents occur to the legs and well over 35 percent occur to the left hand and wrist.
Can a chainsaw cut metal?
To answer your question: “Can a chainsaw cut through metal?” The answer is yes, a chainsaw can cut through metal. Chainsaws are multi-purpose machines that can be used in a variety of situations. However, you should not randomly pick up any old chainsaw off the shelf at your local hardware store.
Why do you need chainsaw trousers?
Chainsaw trousers are packed full of super-strong ballistic fibres known as “Aramid” fibres. When the chainsaw meets the outer layer, these fibres are drawn out of the trousers and into the engine of the chainsaw, causing a jam. The chainsaw will then stop and prevent any more damage being done to the user.