No, it is not bad to cut the wet wood with your chainsaw. The more moisture found on the wood, the less effort required to cut through it because the wet wood does not place any additional resistance on your chainsaw. A diesel, gasoline, or petrol-powered chainsaw is always safe to use in all kinds of weather to cut both wet and dry wood.
The best solution to cut wet wood with a chainsaw is to let the wood dry out. Cutting through wet wood does not accelerate the wear of your chainsaw any more than other types of wood. The best type of chainsaw to cut wet wood is a chainsaw with a gas motor.
can you chainsaw wet wood Related Question:
Is it better to chainsaw wet or dry wood?
Wet Wood Vs Dry Wood But wet wood is actually much easier to cut than dry wood. With dry wood lacking moisture content, more friction is created as the chainsaw chain comes into contact with the wood fibers. This friction results in the chain slowing down.
Can you chainsaw a wet tree?
No, it is not bad to cut the wet wood with your chainsaw. Dewdrops, raindrops, or the snow on the wood will not cause any harm to your chainsaw. It is, in fact, much easier to cut through the wet wood than dry wood because the extra moisture on the wood will act as a natural lubricant.
Can you use a chainsaw in water?
No, you can not run a chainsaw in the water. You can work in the rain and wetlands, but you cannot submerge a regular chainsaw underwater to cut anything under the water surface. If you submerge a gas-powered chainsaw underwater, the water will get into the engine and ruin your chainsaw.
Should I run my chainsaw dry?
Should I run my chainsaw dry? Never run your chainsaw dry, instead use a quality gas stabilizer. A stabilizer will keep fuel fresh and protect a chainsaw fuel system from damage caused by stale gas.
Is it safe to use an electric chainsaw on wet wood?
Finally, water and electricity have never been known to go together. If water gets inside your electric motor, your tool may be at a high risk of malfunctioning or failing to work altogether. Therefore, you should never use an electric chainsaw when wet.
Why does my chainsaw bar smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Can you cut a tree after it rains?
What Kind of Weather Do I Need for Tree Removal? Unfortunately, storms, high winds, and even light rain usually means the tree removal process will have to be rescheduled. In most instances, a tree cannot be taken away unless the weather is very calm and mild.
Is it OK to leave gas in chainsaw?
To store your chainsaw, do not run it out of gas for the winter. This allows the interior seals to dry (and possibly crack) and that is very bad for your saw.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
How often should I oil my chainsaw?
It is recommended that you grease the bearing in the tip of the bar each time you refuel. Make sure to grease the tip at the end of the day as well to help prevent moisture from entering the bearing as the bar cools.
Can you leave a chainsaw in the rain?
It is not recommended to leave a chainsaw in the rain. Chainsaws are designed with moving parts that can rust and corrode when they come into contact with moisture. This means that if your chainsaw is exposed to rain, you may need to have it serviced or replaced sooner than expected.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How long should a chainsaw stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Can you cut a stump with a chainsaw?
A chainsaw, however, can grind up a stump and leave it all but gone; still, you can’t use a chainsaw to completely grind away a stump. After much of the stump is gone, however, dirt and other material can cover the stump so it won’t be noticed.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.