Yes, you can use a track saw without a track. The saw will function the same as a circular saw when used this way. The Festool track saw even has a separate depth setting for use without the track.
A circular saw performs double cuts as the rip cuts and the crosscut, whereas the track saw three. The circular saw has a protective guard, whereas the track saw has none. A circular saw is slightly heavy hence not easy to carry, whereas the track saw is lighter.
If you just use a circular saw with homemade guide like you have been doing for years, then that will save you some money over buying the track saw and tracks. Aside from the potential of better dust collection, the track saw has an advantage of being able to put the edge of the track exactly on the line, often without requiring clamping, and the saw and track are essentially locked together for very precise motion while you make the cut. A regular circular saw can make the cut, but one must figure offsets in for positioning the straight edge and since the saw isn’t constrained to a straight line, the cut may or may not be as clean as with a track saw.
On the surface, a track saw and a circular saw look very similar. In our track saw vs circular saw comparison, we’ll be taking an in-depth look at both of these powerful tools to see which one is best for you. Whether you’re cutting sheets of wood to make a piece of furniture, cutting the deck to size, or creating smaller homemade projects, a power saw is great.
Before we move on to identify the differences between the circular saw and track saw, it would be a good idea to see what these two saws actually are and also their specific workability. Some of the conventional circular saw classification are hypoid circular saw, worm driven circular saw, and sidewinder circular saw. Track saw vs circular saw, both saw are unique and extremely use for woodworkers.
can you use a track saw as a circular saw Related Question:
Can you use a plunge saw as a circular saw?
A plunge saw is like a circular saw with a blade that spins and cuts, only with much more sophistication and accuracy. Rather than the guard retracting to expose the blade when cutting, such as with a circular saw, it has a fixed guard and the blade is exposed when plunging the handle to the pre-set depth.
Can any circular saw fit on a track?
There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone.
What is the advantage of a track saw?
Track saws make long, precise cuts faster and better than table saws and circular saws. They are light and portable, don’t need clamps and set up quickly and accurately.
Is track saw safer than table saw?
Track saws are much safer than table saws. Table saws are more powerful than track saws. Track saws allow you to cut large sheet goods that may be difficult to handle on a table saw. Table saws allow easy repeatability when making rip cuts.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.
Can you joint with a track saw?
As a result, a track can replace a jointer to square and joint the edges of timber. However, it cannot completely replace the ability of a jointer to remove bows, cups, and bends. Because you can cut straight edges with a track saw, it is an excellent tool for jointing lumber edges.
How deep can a track saw cut?
Most track saws can cut just over 2 inches deep; however, some of the larger track saws can cut up to 2½ inches deep.
What is at track used for?
T-track is a versatile product that has many great uses around the shop. It can be attached to the fence of a chop saw, drill press or router table to provide a quick, secure place to attach feather boards, stops and hold-downs.
Why track saw is better than table saw?
In terms of sheer portability, a track saw breaks down into a circular saw and a track. And, most long tracks can break down into two or more pieces for easier moving. Similarly, track saw components take up relatively much less storage space than a table saw.
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
How shallow can a circular saw cut?
Circular saws turn corners about as well as a freight train, and standard models will cut only about 2 1/2 inches deep. There are ways around the shallow cut—for example, you can flip over a 4×4 and cut from two sides—but the curve limitation has no work-arounds.
What is the space between two protruding teeth on a saw blade called?
Gullet (handsaw) The space between a saw’s teeth, where the saw dust is carried out. It is an equilateral triangle, just like the file that shapes the teeth.
Can you rip boards with a track saw?
The track saw is great for ripping boards, cutting trim, and providing splinter-free cuts across panels. The track saw is also excellent when used as a plunge saw because you can set it to a precise depth and it won’t fail you.
