Use a glass cutter to score the tile on the cut line. VIDEO TRANSCRIPTDanny Lipford: Usually when you’re doing some ceramic tiling around your house, you have to go to the rental center and rent a tile cutter. When you hear that crackling sound, you know the glass cutter is scoring the ceramic surface of the tile.
A tile nipper, also known as a nibbling tool, will help you to cut tile in small snips, which is difficult to do with larger tools. Cutting curved glass is another challenge if you’re not sure which tools you need! Yes, using a wet saw for glass tile is a time-effective method to get clean glass edges and reduce the risk of damaging glass tiles. As you can see, there are various tools to use for cutting tiles based on the type and number of tiles, as well as the kinds of cuts you want to make.
If you’re used a glass cutter, place a length of wire hanger or other appropriately sized material beneath the scored line, then push down on either side of the tile to snap it; alternatively, grab the tile nippers and snip off the scored piece. Whether you plan to invest in the purchase or rent one to save a few bucks, just make sure you pick up a tile cutter that’s big enough for the tile you’re cutting! Then, as mentioned above, practice on a few spare tiles until you’re comfortable with this tiling tool. Starting at the edge of the tile, place the tile into the tile nippers and squeeze, removing just a small amount of tile.
ceramic tile cutter how to use Related Question:
Do you push or pull a tile cutter?
As you can see, both push and pull tile cutters have their advantages and disadvantages. Some professional tilers prefer the push cutter because it’s easier on the wrist and allows them to have more control, while others prefer the pull cutter because they can use their knee to stabilize the tile during a cut.
Why is my tile cutter breaking tiles?
Pressure snaps the tile at the scored line. Lowes.com recommends applying equal pressure on either side of the tile with both hands. Too much pressure can cause tiles to crack and break.
Do you cut ceramic tile face up or down?
Regardless of the kind of tile you’re cutting, the best method is to cut with the front of the tile facing up. The front is the side that will be exposed once you lay the tile. This method ensures the smoothest finished edge on the tile with the least amount of chipping.