Don’t ever move from cutting area to area with the chain in cutting mode. Do use a sawhorse when cutting large logs, if possible. Make sure the log or branch you are cutting is stable and don’t ever cut up hill, a rolling log can do serious damage.
Kickback happens when the chain’s rotational energy gets thrown back at you, and you lose control of the saw. LINEAR KICKBACK. If the chain gets pinched on either side by the wood being cut, the whole saw can get pushed back at you, full speed. PULL-IN KICKBACK. If your saw hits a branch on the other end of the wood, or even a nail, it can yank the saw forward and away from you.
In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain.
chainsaw do’s and don’ts Related Question:
What is chainsaw safety tip?
Do not operate a chainsaw with one hand. Keep a tight grip with both hands wrapping your fingers and thumbs around the top and rear handles. Remain aware of your surroundings. Keep your work area free of tripping hazards and the cutting arm away from obstructions. Run the throttle at full speed.
Do you start a chainsaw with the brake on?
When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
How often do you need to sharpen a chainsaw?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Should you let a chainsaw warm up?
The gas engine in a gas chainsaw should warm up, but due to the engine’s small size, this will happen quickly. Normally the engine will run for a short time after startup before you really start using it, giving the oil enough time to warm up and lubricate all engine parts.
What do you need to run a chainsaw?
Don’t scrimp on safety gear when doing chainsaw work. You’ll need a chainsaw helmet with face screen, chaps, and gloves. And don’t ignore footwear. Regular work boots are okay if you’re using your chainsaw in your backyard, but if you’re out in the woods, it’s safer and more efficient to wear logging boots.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Should I wear gloves when using a chainsaw?
Chainsaw gloves are very essential for using a chainsaw safely. Good cut resistance glove will protect you in case you accidentally hit your glove with the chainsaw. They will also keep your hands warm and protect your fingers against other hazards.
What’s the safest chainsaw?
Chainsaws are useful when doing work on your home, but they can feel dangerous to use. It’s not too bad if you know what you’re doing, but it’s so easy to make one wrong move—and then it’s game over. Enter the WORX JawSaw.
When should I use choke on my chainsaw?
The choke position is the fourth setting on the master control lever. This setting is used to start the saw when its motor is cold. Stihl chainsaws denote the choke position using a nearly horizontal squiggle between two vertical lines at the lowest position on the master control lever.
What does it mean when a chainsaw kicks back?
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback occurs when the end portion of the nose of the bar (the kickback zone) strikes an object and the chain momentarily snags, or is pinched.
What are metal bucking spikes on a chainsaw?
Bumper Spikes: This series of sharp metal spikes protruding from the saw near the base of the bar provide leverage for easier, more controlled sawing. Jab the spikes into the log, then pivot the bar downward to guide the chain through the cut.
How long should you run a chainsaw?
Depending on the type and usage, you can expect a gas Chainsaw to run between 15 and 40 min before you have to fill it up again. Most battery-powered chainsaws have a run time of up to 2 hours, but there are high-capacity power packs that will last much longer.
Do you have to run in a chainsaw?
Refrain from running your chainsaw at full throttle during its first three fuel tank fillings. Doing so will help to prevent heavy-duty workloads while the saw is within its break-in period. Your Stihl chainsaw engine will reach its maximum power after you have refueled its tank five to 15 times.
Why does my chainsaw blade go dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.