Sometimes the chainsaw chain gets hot and makes it difficult to cut wood. Why does my chainsaw chain heat up and burn wood? The first possible explanation is simply that you have mounted the chain upside down. If you bought the chainsaw from a hardware store, sometimes overwhelmed salespeople may have put the chain back on the chainsaw incorrectly. Sharpening the chain to prevent the chainsaw from heating up and burning the wood. Hold the chain in a vise so that it does not move and file the chain from the inside of the chain to the outside. Your chainsaw burns wood because of poor lubrication. An injection problem explains that the chain of the chainsaw burns wood.
Under normal circumstances, a sharp chain will cut away wood before that heat has a chance to build up, but if a chain is dull, the heat will build up quickly, causing the wood to smoke and eventually burn before the chainsaw makes its way completely through the tree. This can cause a massive amount of heat to build up and result in your chainsaw burning wood and smoking from the heat produced from the friction. An embarrassing yet extremely common cause of a chainsaw producing smoke and burning wood is a chain put on backward.
Take the guess work out of your repairs with our Fix app. Tap to download and it’s as easy as snapping a photo to find repair parts guaranteed to fit.
My bar did get pinched pretty good while cutting a giant privet tree. You should see some oil getting flung off the bar and painting a stripe of oil on the log. You can also check the bar groove with the handy 36 bar groove checker: A dime should fit in the slot of of an.050″ gauge bar, a nickle should fit in an.058″, and a quarter should fit in an.063 gauge bar.
chainsaw is burning wood Related Question:
Why does my chainsaw smoke when cutting?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Is it normal for a chainsaw bar to get hot?
It is normal for the blade of your chainsaw to produce some heat. But it should not overheat or smoke. If you notice any overheating or smoke coming out of the blade, you should stop its use at once.
Does burnt wood dull a chainsaw?
Cutting burned trees is extremely demanding on a chain saw. It is very abrasive and fine particles. Check the air filter often. It will need cleaning or replacing on a regular basis.
How long should a chainsaw chain stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
What makes a chainsaw overheat?
Common reasons behind chainsaw overheating are a wrong oil/fuel mixture, a blocked or clogged exhaust. It is also possible that the air filter is clogged. Or you are using a dull chain. If you are using your chainsaw for an extended time, or it is not powerful enough for the job, it can also overheat.
How hot should a chainsaw get?
At temperatures over 220 Fahrenheit and occasionally as high as 220F, it often stratifies on top of an oil pan.
Should a new chainsaw smoke?
An abundance of smoke emanating from the engine often indicates that an excessive amount of oil has been introduced into the oil and gasoline mixture that powers the chain saw. Ensure that you’re mixing the correct amount of oil and gasoline according to the dictates of your owner’s manual.
Why does my chainsaw blade go dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How many times can you sharpen a chainsaw?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Can you over tighten a chainsaw chain?
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don’t over-tighten the chain as this could cause it to break.
Why does chainsaw chain keep coming loose?
Chain Not Set Properly One of the most common reasons why your chain might be coming loose is because it was not set properly. When you go through the steps to tension your chain, you need to finish those steps by setting the tension so it won’t change as you work your saw.
Why does my chainsaw only runs on choke?
When your chainsaw only runs if the choke is on the problem, in most cases, is a result of fuel supply problems or a faulty carburetor. To fix the problem you should check and clean the fuel system and carburator.