Looking at both specs they both use a 5/32″ file and . 050 groove width fin and on the Home Depot y62 chain info it says it replaces the S62 Oregon chain. The S62 is one chain in package and S62T is two chains in package.
chainsaw chain s62 vs y62 Related Question:
What do numbers on chainsaw chain mean?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The first number represents the pitch: 1 = 1/4″ 2 = 0.325″
Is more teeth on a chainsaw chain better?
The rule of thumb is that a saw blade with more teeth means a smoother cut and fewer teeth means a faster cut. There are other things that affect the cut quality and the feed speed, like how fast you feed the material into the saw blade and how fast the saw blade is turning.
Does the pitch matter on a chainsaw chain?
Yes, pitch does matter. If you change to . 325 chain you will also need to change the drive sprocket. If the saw has a floating rim then just change that, otherwise it is a new drum which may not be available.
What is difference between S56 and Y56 chains?
The S56 could replace a Y56 chain. The difference in the 2 is not significant. The Y indicates that it would have less vibration than other chains. 4 of 4 found this helpful.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Is Cedar hard on chainsaw chain?
It comes from the factory sharpened at 35 degrees. Cedar is pretty soft wood, so I presume it is something in the bark that is dulling your chain. Full chisel chains will definately dull faster in gritty or dirty cutting conditions than semi-chisel will.
What difference does the pitch make on a chainsaw chain?
Chain pitch The spacing between the links on the chain must match the spacing between the teeth on the bar tip sprocket and drive sprocket. What you would typically see is that a larger pitch would indicate a heavier and bigger chain.
Can you square file a round chain?
You can take a square ground chisel chain and round file it,you waste a little of the cutter but end up with round ground chisel. Works the outher way too you can convert round ground chisel to square.
Does it matter how many drive links on a chainsaw chain?
For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile. Shorter chains can cut branches under two inches much faster than long ones because the short length of the blade doesn’t get caught up in them as much.
What chainsaw pitch is best?
Experts say the best chainsaw chain for cutting firewood is the Husqvarna High Performance 18 inches, 0.05 gauge, 0.325 pitch chain.
What is a 3/8 pitch chain?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
How do I know what chain I need for my chainsaw?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What chainsaw chain stays sharp the longest?
Husqvarna Chainsaw Chain 16″ . The x-Cut line of Husqvarna chains is also designed to stay sharp longer, so you can cut for a longer amount of time before the chain needs sharpening.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
What is a 3/8 low profile chain?
Low profile chain is generally available in a 3/8” pitch and a . 050” gauge and fits bars specifically made for low profile chain. If your saw uses a bar that requires more than 72 drive links on its chain, low profile chain will not work with your bar and saw.