This tool has 1,200 ft. lbs. of torque power, which allows it to loosen even the most difficult fasteners.
For long periods of time, it should weigh less than 12 lbs. to be comfortable to use.
6 Vane motor for speed and power that will work with any 1/2″ air hose is available.
Our twin hammer high performance clutch has a longer life span, even when subjected to extreme temperatures.
It is important that the operator is not exposed to exhaust air because of the ergonomic handle exhaust.
The Manufacturer’s Statemen.
The New CP7763 is a Super Duty High Power 3/4-Inch Impact wrench with a ratcheting mechanism. Though conservatively rated at 1200 ft./lbs, the power consistently outperforms its competitors. The Twin Hammer Clutch is designed for maximum durability. Increased speed and power are provided by a 6-vane motor. Handle Exhaust handle with an ergonomic grip. Three-position power regulator and directional control with one lever for all controls, with three positions in forward, full power reverse, and no power. This will be the tool of choice for high-volume truck spring, truck maintenance, and heavy equipment shops because it is built to last in the most demanding environments possible. Square drive: 3/4-Inch square drive. 100-950 foot-pounds of working torque, maximum torque @ 90psi reverse: 1200 foot-pounds of maximum torque at 90psi reverse. Free Speed: 6300 RPM, Length: 8.8-Inch, Free Speed: 6300 RP. Tool weight: 11.57 lbs, average air consumption: 7.5 CFM, total weight: 11.57 lb. Axial air inlet thread: 3/8-Inch, minimum hose size: 3/8-Inch, sound level in decibels (A): 96, vibration level in milliseconds per second (m/s2): 9. The strength of this tool will appeal to you.
It appears to be in good working order. It’s been working out well so far for the shop. It’s a little on the heavy side, but I was looking for durability and wasn’t sure how well the composite would hold up to the abuse.
