This saw uses a 6 ½” blade, and this one uses a 7 ¼”. The 6.5 will cut up to 2 1/16″, while the 7 ¼” cuts up to 2 ⅜”. “Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Whether you buy HART or another brand of circular saw, the choice between 6.5 and 7 saw comes down to this.
Cuts While a 7.25 circular saw can cut through materials up to 4 inches thick, a 6.5 inches circular saw can cut through materials up to 2.5 inches. A 7.25 inches circular saw is heavier than a 6.5 inches circular saw. If you deal with wood occasionally, rather than regularly, a 6.5 circular saw will be the best saw for you.
I’m looking to purchase a cordless 20V DeWalt circular saw, and I’m not sure what I’ll be missing out on if I go with the smaller 6.5″ version versus the larger 7 1/4″. The price is close enough between the two that it doesn’t matter. I thought the 7 1/4″ would be a good deal heavier, but according to Amazon, it’s 7.5 pounds versus 7.1 pounds for the 6.5″ version. I just do the occasional garage carpentry – nothing too serious.
A 7.25-inch circle saw can cut into materials up to four inches thick, whereas a 6-inch circular saw is only capable of cutting through material up to 2.5 inches in thickness. The 7.25 circular saw can be used to create an angular cut the 6.5 circular saws would not be an option if you need to make this type of cut. A circular saw with a diameter of 7.25 inches weighs more than a circular saw with a diameter of 6.5 inches.
circular saw 6 vs 7 Related Question:
What size of circular saw is best?
The most common and useful size for DIYers is 7 and 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.
What can you cut with a 6.5 circular saw?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
Can you use a 7 blade on a 6.5 circular saw?
NO, a 7″ blade will not fit inside the blade guard. Also, it’s rough on these little saws cutting concrete or tile unless you reduce the blade size.
How thick can a 6 1 2 circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
How thick of wood can a 7 1 4 circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
Can a 6 1 2 inch circular saw cut a 2×4?
Circular Saw Features The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
How deep can a 6 circular saw cut?
Depth. A 6 ½ circular saw can cut materials up to 2.5 inches. It’s perfect for cutting small materials for a small DIY project.
Can you use a 6 blade in 6.5 circular saw?
Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″).
Can a 6 1 2 circular saw cut a 4×4?
Like miter saws that measure less than 12 inches, a circular saw’s 6.5-inch or 7.25-inch blade will not cut cleanly through a 4×4. The maximum depth of most circular saws is just 2.5 inches. This means you’ll need to make two cuts. Having to make two cuts makes it easier to set up the cut.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can a circular saw cut a 4X4?
Yes, it is possible to cut a 4X4 with a 6.5 inch circular saw. Because the cut depth of this size saw won’t fully cut through the material in just one pass you will need to rotate your workpiece and make multiple cuts to fully separate the wood.
Can a circular saw cut a 2X4?
Yes, a 7-1/4 inch circular saw has plenty of blade depth to cut a 2X4. This blade size can even make quick and easy 45 degree angle bevel cuts through a 2X4.
Can a 5.5 inch circular saw cut a 2X4?
The Ryobi cicular saw is a 5.5″ saw, and it can cut a 2×4, just barely.
