While the saw is ideal for those purposes, you can also use it to make furniture-grade cuts in wood, cut steel or aluminum, reduce unwieldly sheets of plywood to more manageable sizes, and do heavy demolition cuts through lumber that has nails in it. These blades are rated for steel plate, pipe and conduit, and shapes such as L, U, and squares; some blades are also designed for cutting the same shapes in aluminum, and a few blades are even rated for making the cut in stainless steel, a notoriously difficult material to cut. Not all metal-cutting circular saw blades will cut thin sheet materials such a roofing and metal trim.
Not only will you need a different blade for cutting metal than you would for cutting wood, but a metal-cutting blade should not be used in the same saw as the type used for wood. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque. As always when purchasing a blade for your circular saw, make sure it has the right diameter and arbor size to match your saw.
Diablo’s new 7-1/4″ Wood & Metal saw blade is the industry’s first multi-purpose saw blade for cutting clean wood and wood with nails, up to 2-1/4″ material thickness; and metal ranging from 3/32″-1/4″ wall thickness and 1/4″-1″ diameter. Diablo’s blade is designed to fit Panasonic and Similar Metal Cutting Saws.5-3/8-Inch diameter by 3T, 2mm arbor, 31+ RPM, 1/8-Inch max cut thickness, mild steel. Diablo’s blade is designed to fit Evolution, Trajan, Jancy, Morse, and Similar Metal Cutting Saws.7-Inch/18mm diameter x 38t, 2mm arbor, 39+ RPM, 1/8″ to 3/8″ max cutting thickness, general purpose steel.
circular saw blade for cutting metal and wood Related Question:
Can you cut wood with a metal cutting circular saw?
You can use a metal blade to cut wood. A circular saw blade cut metal in a sluggish rotational speed of 25m/s. They are driven by a motor having high power and an A/C vector drive. They are long lasting and non-reusable.
Can you cut metal with a wood blade?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
Can you put a metal blade on a circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What blade is best for cutting metal?
Ferrous blades are ideal for cutting metals that contain iron, such as stainless steel or cast iron. Choose a non-ferrous blade when cutting softer metals, like aluminum or copper. For the best results, use a diamond blade that’s rated to cut the type of metal you are working with.
Can you cut wood with an aluminium blade?
Aluminium is relatively soft as metals go, and by comparison many woods although softer are weirdly more wearing of cutting edges. Also, clearance angles are different so it’ll cut some wood or board materials well and others much more poorly but this is also true of some wood blades!
Can you cut wood with a metal Sawzall blade?
Reciprocating saws can churn through metal, masonry, wood, plaster, fiberglass, stucco, composite materials, drywall and more. The key to a successful cut is using the right type of blade for the material you are cutting.
Can you turn a circular saw blade backwards to cut metal?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
Can a carbide blade cut metal?
Tungsten carbide, called simple “carbide” in the building trades, is three times harder than steel; and when placed on circular saw blades, reciprocating saw blades and grinder discs, tungsten carbide cuts cleanly through steel.
Can a carbide blade cut wood?
It is never wrong to use a Carbide Tipped saw blade for cutting wood. Carbide tipped saw blades cut almost everything from asbestos to Zirconium, including paper, plastics, rubber, steel, insulation, aluminum, and even food, as well as every kind of wood in the world and all the wood composites.
What is the best tool for cutting metal?
Hacksaw. The original metal-cutting tool, the manual hacksaw, is an easy, inexpensive option for cutting through metal (and a slew of other materials). Ideal for small projects and home improvement needs, the hacksaw is typically one of the first tools a homeowner purchases, thanks to its low cost and versatility.
Can you use a masonry blade to cut metal?
Yes, certain diamond blades can cut through metal, but this will depend entirely on the blades application. Most diamond blades are used to cut through concrete, brick, tile, and asphalt. But, not all blades are the same.
Can you cut metal studs with circular saw?
Use the miter saw to slowly cut down and through the stud. You can also follow the same process using a circular saw. However, because even the best compact circular saw is handheld, it isn’t quite as accurate as a miter saw.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What type of blade can cut through steel?
Carbide tipped blades cut harder, denser metals like hardened steel, cast iron, alloys including boron steel, and higher grades of stainless steel. These blades are extremely hard, heat-resistant, and impact-resistant.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
