Aside from selecting a circular saw blade based on factors like the number of teeth, positive-negative zero saw blades, tip style, and many other factors, you also need to select a saw blade according to the material type you will cut. Choosing a circular saw blade for cutting hardwood can be a bit confusing, given the myriads of brands and models of saw blades in the market today. Since circular saw blades come in different varieties and make, you may get confused about which saw blade to choose for ripping hardwood.
With the best circular saw blade for hardwood, your work will be fast and smooth. Get familiar with the list of the prime blades for the circular saw. Back to menu How to pick circular saw blade for hardwood.
The best saw blade for ripping hardwood is a rip blade. These blades can handle ripping and crosscuts, or cuts made against the grain, because they have alternately beveled teeth like crosscut blades and FT teeth like rip blades. As long as you have the tools to rip hardwood safely, you can make a smooth rip cut while avoiding dangers like kickbacks.
Be extremely careful when using a circular saw and wear proper eye, ear, and lung protection regardless of the blade that is installed. The better approach is to use a jig saw with a fine blade, or a table saw with an 80-tooth blade. Straight cuts with a circular saw and fine blade can work, especially if the panel and a straight edge guide board are clamped in place.
While the saw is ideal for those purposes, you can also use it to make furniture-grade cuts in wood, cut steel or aluminum, reduce unwieldly sheets of plywood to more manageable sizes, and do heavy demolition cuts through lumber that has nails in it. These blades are rated for steel plate, pipe and conduit, and shapes such as L, U, and squares; some blades are also designed for cutting the same shapes in aluminum, and a few blades are even rated for making the cut in stainless steel, a notoriously difficult material to cut. Not all metal-cutting circular saw blades will cut thin sheet materials such a roofing and metal trim.
circular saw blade for hardwood Related Question:
What circular saw blade is best for hardwood?
The IRWIN Tools MARATHON Carbide Corded Circular Saw Blade is a heavy-duty and premium quality circular saw blade that you can use for cutting through different kinds of wood, including hardwood and plywood. It has a diameter of 7¼” and 24 spaced and razor-sharp construction-grade carbide-tipped teeth.
What is the best saw blade for cutting hardwood?
The best saw blade for ripping hardwood is a rip blade. This blade is specially made for cutting through wood fibers, so it will cut through hardwood easily and leave a clean edge. Rip blades usually have 10 to 40 flat-topped (FT) teeth, which is a comparatively small number, but it will move through the grain quickly.
Can you cut hardwood with a circular saw?
Circular Saw A circular saw is a portable power saw that can be used to cut wood flooring. It uses a rapidly rotating toothed disk that you glide through the wood. It is the cheapest power saw a DIY beginner can use for cutting hardwood floors and for any woodworking project for that matter.
How many TPI do you need for hardwood?
If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
What is a 40 tooth saw blade used for?
Deep gullets provide good chip removal. Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
How many teeth should my circular saw blade have?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
What is the purpose of the gullet on a saw blade?
Gullet. The space between the teeth and the body of the saw. This space holds the sawdust while the teeth are in the cut. The gullet must be large enough to hold all the sawdust produced.
How do you cut hardwood floors without chipping them?
Tape the wood. Run a piece of making tape over the wood before drawing the cut-line and then cut through the masking tape. Taping holds the surfaces of the wood together, helping to prevent splintering.
Can you cut oak with a circular saw?
Straight cuts are best with a circ saw with a decent blade guided against a straight edge. I doubt you’ll cut 26mm Oak either straight or square with a jigsaw. Cut outs and scribes I’d do with a 1/2 inch bit in the 1/2 inch router running against a template made from 6mm MDF.
What is a 60 tooth saw blade used for?
Honorable Mention: 60t or 80t Cross Cutting Blade A good cross cutting blade is designed to provide ultra-smooth cuts going across the grain without splintering or burning. And ultra-smooth cuts equate to better precision and tighter joinery in your projects. Generally, more teeth equals a better cut.
What is a 180 tooth saw blade used for?
Designed for cutting a variety of materials, including plywood, vinyl siding, and plastic, the CRAFTSMAN 10-in 180-tooth high-speed steel miter/table saw blade set is a must-have for your workshop.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
Which saw blade makes the smoothest cut?
The 44-tooth blade (left) makes a smooth cut and is used for trim carpentry and cabinet making. The coarse 24-tooth blade (right) cuts quicker and is used for rough carpentry work.
