Not only will you need a different blade for cutting metal than you would for cutting wood, but a metal-cutting blade should not be used in the same saw as the type used for wood. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque. As always when purchasing a blade for your circular saw, make sure it has the right diameter and arbor size to match your saw.
circular saw blade for metal and wood Related Question:
Can you put a wood blade on a metal circular saw?
Not only will you need a different blade for cutting metal than you would for cutting wood, but a metal-cutting blade should not be used in the same saw as the type used for wood. This is because a wood-cutting circular saw has an open motor housing.
Can you use a wood saw on metal?
It’s just not a good idea to use a wood cutting saw for metal cutting. Stick with circular saws designed for each specific task, and don’t be afraid to go for a corded metal cutting saw if a cordless model is too tough on your budget.
What is the difference between wood and metal saw blades?
Metal Cutting Blades have more teeth per inch for cutting harder, denser materials. They are typically 10 to 18 TPI, but can go as high as 24 TPI. They are also used for finish cuts in wood because they leave a smooth edge.
Can I use a steel blade to cut wood?
A blade meant for metal will cut wood, but it will do it slowly and the blade will get hot. When the blade overheats it will scorch the wood and it will cause the teeth to lose temper, essentially destroying the blade.
Can I use circular saw on metal?
Cut Metal with Your Circular Saw It may not be an obvious choice, but fitted with the right blade, a circular saw is a great metal-cutting tool. In our test, it cut through rebar like a hot knife through butter. You can cut mild steel up to about 3/8 in. thick using a ferrous-metal-cutting blade.
Can I turn saw blade backwards to cut metal?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
Can you use a wood blade to cut aluminum?
Choosing the Right Blade for Cutting Aluminum Standard woodworking blades with carbide tips still work but require extra precautions. The tips are more likely to grab the aluminum or break off. Almost all major blade manufacturers make blades specially designed for cutting non-ferrous material.
What kind of saw blade cuts metal?
Ferrous blades are ideal for cutting metals that contain iron, such as stainless steel or cast iron. Choose a non-ferrous blade when cutting softer metals, like aluminum or copper. For the best results, use a diamond blade that’s rated to cut the type of metal you are working with.
Can carbide blade cut metal?
Tungsten carbide, called simple “carbide” in the building trades, is three times harder than steel; and when placed on circular saw blades, reciprocating saw blades and grinder discs, tungsten carbide cuts cleanly through steel.
What does TCT mean on saw blades?
Tungsten Carbide Tips. TCT saw blades are specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt and titanium-based metal. All of this is possible thanks to the teeth on the saw blades, and the tungsten carbide tips, or TCT.
Can a carbide blade cut wood?
It is never wrong to use a Carbide Tipped saw blade for cutting wood. Carbide tipped saw blades cut almost everything from asbestos to Zirconium, including paper, plastics, rubber, steel, insulation, aluminum, and even food, as well as every kind of wood in the world and all the wood composites.
Can carbide tipped blade cut aluminum?
An occasional cut of aluminum can be done safely on woodworking tools and with woodworking saw blades. Protect yourself from the chips, use a slow feed speed and a 40-60 tooth 10″ carbide blade and you should be OK.
Can you use diamond blade to cut wood?
According to DIY blog Hunker.com, diamond blades aren’t the best choice for cutting wood. As stated earlier, these saws are manufactured to handle the toughest materials, and wood isn’t one of those. Wood, especially boards, have soft fibers which can easily be damaged when the cut is not done correctly.
Can I use a metal cutting disc on wood?
You can cut the wood using the regular “steel” cutting blades. I use 3mm flat discs with no teeth. The wood will char at the edges of cut, but if you don’t mind the edges slightly burned and the smell, it can be used for small jobs.
Can you cut wood with metal jigsaw blades?
Metal-cutting jigsaw blades have tiny but hard, sharp teeth that can cut through most mild metals, including sheet metal, wood with nails embedded in it, bolts, hinges, and galvanized and copper pipes.
