circular saw blade for metal home depot Related Question:
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What blade is best for cutting metal?
Ferrous blades are ideal for cutting metals that contain iron, such as stainless steel or cast iron. Choose a non-ferrous blade when cutting softer metals, like aluminum or copper. For the best results, use a diamond blade that’s rated to cut the type of metal you are working with.
What TPI is best for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
Is there a saw blade that cuts metal?
Metal cutting saw blades or circular saw blades are designed to cut through an array of metals that vary on the basis of toughness and porousness. Needless to say, some of these products are much better than others.
Can you use a circular saw on metal?
Cut Metal with Your Circular Saw It may not be an obvious choice, but fitted with the right blade, a circular saw is a great metal-cutting tool. In our test, it cut through rebar like a hot knife through butter. You can cut mild steel up to about 3/8 in. thick using a ferrous-metal-cutting blade.
Can Home Depot cut metal for you?
While Home Depot does not cut metal sheets, rods and roofing materials, you may wonder if the store can cut metal pipes for you. Home Depot does cut metal pipes, as long as you purchased the pipes from the website or store. All you need to do is bring your metal pipes and receipt to the plumbing section.
What type of blade can cut through steel?
Carbide tipped blades cut harder, denser metals like hardened steel, cast iron, alloys including boron steel, and higher grades of stainless steel. These blades are extremely hard, heat-resistant, and impact-resistant.
What is the best tool for cutting metal?
Hacksaw. The original metal-cutting tool, the manual hacksaw, is an easy, inexpensive option for cutting through metal (and a slew of other materials). Ideal for small projects and home improvement needs, the hacksaw is typically one of the first tools a homeowner purchases, thanks to its low cost and versatility.
Can carbide blade cut metal?
Tungsten carbide, called simple “carbide” in the building trades, is three times harder than steel; and when placed on circular saw blades, reciprocating saw blades and grinder discs, tungsten carbide cuts cleanly through steel.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
How many teeth does it take to cut metal?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
Which way should a blade be installed on a circular saw?
Almost all circular saw blades have an arrow that is either printed or engraved on the blade. This arrow indicates which way the blade should be installed in the saw. The arrow needs to point towards the front of the circular saw. If we don’t see an arrow the teeth need to face towards the front of the saw.
What kind of saw blade do you use to cut aluminum?
When cutting material up to 1/8-inch thick, use a blade with 10 teeth per inch, such as a 10-inch x 100 tooth or 12-inch x 120 tooth blade. For material up to 1/4-inch thick, use eight teeth per inch. For thicker sheets of aluminum, use a blade with just six teeth per diameter inch.
Can you cut metal with a wood blade?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
Will a steel blade cut aluminum?
Ferrous metal blades can be used for cutting all types of metal construction products including steel siding, roofing, steel studs, and other construction steel. Non-ferrous metal blades are designed for cutting products such as aluminum, aluminum trims, copper and brass.
