“One LENOX blade easily lasts as long as 20 of the blades we used before. They cut like butter. You hardly have to put any pressure on the LENOX blades, and they cut in at least half the time.” WARRANTY. LENOX warrants to the original owner that its products are free from defects in material and workmanship for the following periods from the date of the original purchase: Hand Tools are warranted for the anticipated life of the tool; torches and torch accessories are warranted for three years. This warranty is void if the product is repaired or modified in any way by anyone other than LENOX. LENOX makes no other warranties, express or implied, concerning the product or the merchantability or fitness thereof for any purpose.
After cutting about 20 feet the saw took more effort to cut the ridges, threw more sparks and metal chips and shavings were left behind. The blade is clealy dulling I am now 40% through and have cut approximately 60 liner feet of the 24 gauge panels. Great Blade Great blade for metal jobs – would use one again and recommend it to anyone – especially to metal roofing contractors.
circular saw blade for metal roofing Related Question:
Can you cut metal roofing with a circular saw?
It’s very easy to cut yourself on the metal roofing, if you don’t have some protective gloves on. You don’t want to use the high speed of a skill saw, or any type of circular saw, because it will create too much heat.
What blade do you use to cut metal roofing?
Fit the saw with a metal-cutting blade. Steel-tooth and carbide-tooth blades are both good choices. A 7 in (18 cm) blade is the perfect size for most circular saws and projects.
Can you put a metal-cutting blade on any circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is the best thing to cut metal roofing with?
Tin snips — These are effectively hand shears for cutting metal roofing. They come in various sizes and calibers, and can be used to cut tin, aluminum, steel and vinyl siding, as well. Variations of tin snips include aviation snips and compound snips, which may be used for heavier gauge metals.
How do you cut a corrugated metal roof with a circular saw?
Guide your saw slowly through the metal. Avoid moving your circular saw at an angle as you cut. The grooves in corrugated metal will make it easy to cut a straight line, but if you try to turn your saw you’ll risk losing control of it. This method is best for cutting long lengths of straight lines in corrugated metal.
How do you cut sheet metal with a circular saw?
Clamp the Metal to Workbench: A metal section to be cut must be hung over the edge of the blade. This helps in the uniform cutting of the metal piece. By turning the circular saw, the blade starts cutting the metal at its desired speed.
Can you turn a circular saw blade backwards to cut metal?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
Can carbide blade cut metal?
Tungsten carbide, called simple “carbide” in the building trades, is three times harder than steel; and when placed on circular saw blades, reciprocating saw blades and grinder discs, tungsten carbide cuts cleanly through steel.
Can you use a masonry blade to cut metal?
Yes, certain diamond blades can cut through metal, but this will depend entirely on the blades application. Most diamond blades are used to cut through concrete, brick, tile, and asphalt. But, not all blades are the same.
How do you cut snap lock roofing?
Cutting. Steel roofing panels may be cut with metal snips, power or hand shears or nibblers. Circular saws with metal cutting blades are acceptable. Do not use abrasive blades, as they can burn both the paint and zinc coating leading to premature wear at these areas .
Can I cut corrugated metal with a table saw?
You can cut sheet metal using your table saw, provided you pick a blade designed for metal. Even with the correct blade, though, it is dangerous. Make sure you cut very slowly and use proper safety gear.
Can you install metal roofing directly to plywood?
You can install metal roofing over plywood; however, you need to carefully inspect the plywood to ensure it is safe to use, and you must use the proper materials. If you attach metal directly to the plywood with no felt or slip sheet, it will not last as long as it should.
What is rake trim on metal roof?
Rake trim (also known as gable trim) is a metal flashing finishing piece placed along the roofline at the sloped sides at the end of a residence’s dormer or gable. Rake trim can be flat with no overhang, or it can overhang the gable end like an eave.
Can you cut metal studs with circular saw?
Use the miter saw to slowly cut down and through the stud. You can also follow the same process using a circular saw. However, because even the best compact circular saw is handheld, it isn’t quite as accurate as a miter saw.
Can you put an angle grinder blade on a circular saw?
The exposed blade can cause significant injuries as the uncontrollable tool flies backwards and strikes the operator. For these reasons, angle grinders must never be fitted with circular saw blades.
