I got the saw used, so I don’t have experience with a new Makita blade to compare to. The old Makita blade still cut ok, but it has “Grabbed” a few pieces on me so I wanted to see if a new blade would help with that. I haven’t cut gobs of metal yet, but my initial cuts in some 1/4″ and 1/8″ angle iron were fantastic.
Though it might seem intimidating at first, especially if you aren’t familiar with cutting metal, learning how to cut metal studs is actually pretty straightforward. The best way how to cut metal studs is with tin snips. By far the easiest way how to cut metal studs is with tin snips or metal snips.
Metal snips are usually used on thinner sheet metal but can be readily used for simple cuts on metal studs. Power tools are your best option for cutting metal studs. A bench-top pipe cutter, with the metal cutting blade installed, can easily cut through metal studs with a highly accurate and smooth edge to the cut.
circular saw blade for metal studs Related Question:
What blade do you use to cut metal studs?
Diamond-tipped saw blades used in handheld circular saws or miter saws can cut through the thin metal of a stud easily. A reciprocating saw using a diamond-tipped blade also cuts through metal studs easily, but the cut tends to be rough.
What is the best tool to cut metal studs?
To cut individual steel studs and tracks, use straight-cut aviation snips (Photo 1). If you need to cut dozens of metal studs and tracks quickly, use a circular saw fitted with a toothless (Carborundum) metal-cutting blade ($7).
What blade is best for cutting metal?
Ferrous blades are ideal for cutting metals that contain iron, such as stainless steel or cast iron. Choose a non-ferrous blade when cutting softer metals, like aluminum or copper. For the best results, use a diamond blade that’s rated to cut the type of metal you are working with.
Can a circular saw blade cut metal?
It may not be an obvious choice, but fitted with the right blade, a circular saw is a great metal-cutting tool. In our test, it cut through rebar like a hot knife through butter. You can cut mild steel up to about 3/8 in. thick using a ferrous-metal-cutting blade.
Can I cut metal studs with miter saw?
Obviously, as long as you’re using the right accessories, you can cut metal with a miter saw.
Can carbide tipped blade cut metal?
Carbide metal cutting blades offer a full range of sizes and profiles for cutting both ferrous and non-ferrous metal. Ferrous metal blades can be used for cutting all types of metal construction products including steel siding, roofing, steel studs, and other construction steel.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
Can you cut metal with a wood blade?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
Can you turn a circular saw blade backwards to cut metal?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
Can I put a metal cutting blade on my miter saw?
Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.
How do you cut sheet metal with a circular saw?
Clamp the Metal to Workbench: A metal section to be cut must be hung over the edge of the blade. This helps in the uniform cutting of the metal piece. By turning the circular saw, the blade starts cutting the metal at its desired speed.
What screws should I use for metal studs?
Often, contractors have to use special screws for metal studs due to the material’s durability. These screws have finer threads and sharper tips to better pierce and provide hold in metal studs. Fine-threaded screws work best because drywall screws are not strong enough for the job.
Can metal studs hold weight?
An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds. Although multiple factors do come into play related to the load weight limit for metal studs, as the length of studs increase, the less weight they support.
Will metal studs rust outside?
G-90 steel has a heavier zinc coating to provide extra protection in hostile environments. Rust on a steel stud can be compared to rot on a wood stud. When a wall is properly constructed, there is little likelihood of a stud rusting to the point of failure.
How do you bend metal studs?
The best way to bend metal studs is to cut their flanges, every 2-3”, on both sides. Actually, if you want to create curves or archways with drywall boards, you have to bend the metal tracks and then fit the steel studs in their channels. In order to make the cuts, we recommend you to use straight-cut thin snips.
