Diablo’s new 7-1/4″ Wood & Metal saw blade is the industry’s first multi-purpose saw blade for cutting clean wood and wood with nails, up to 2-1/4″ material thickness; and metal ranging from 3/32″-1/4″ wall thickness and 1/4″-1″ diameter. Diablo’s blade is designed to fit Panasonic and Similar Metal Cutting Saws.5-3/8-Inch diameter by 3T, 2mm arbor, 31+ RPM, 1/8-Inch max cut thickness, mild steel. Diablo’s blade is designed to fit Evolution, Trajan, Jancy, Morse, and Similar Metal Cutting Saws.7-Inch/18mm diameter x 38t, 2mm arbor, 39+ RPM, 1/8″ to 3/8″ max cutting thickness, general purpose steel.
circular saw blade for steel pipe Related Question:
Can a circular saw cut metal pipe?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is the best blade to cut steel pipe?
Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best. As far as the best brand of metal cutting blade, we like MK Morse.
What type of blade is used to cut steel?
Ferrous blades are ideal for cutting metals that contain iron, such as stainless steel or cast iron. Choose a non-ferrous blade when cutting softer metals, like aluminum or copper. For the best results, use a diamond blade that’s rated to cut the type of metal you are working with.
Which saw is best for cutting through a metal pipe?
Heavy-duty steel pipe and tube cutters are usually the easiest to use, but for tight spaces, an angle grinder or reciprocating saw may be needed. When using a metal pipe cutter, align the tool around the marked place on the galvanized pipe and rotate so that the wheel cuts deeper into the pipe until severed.
Can you turn a circular saw blade backwards to cut metal?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
How do you cut stainless steel with a circular saw?
You can quickly cut through stainless steel with a circular saw if you use the right blade. Make sure you get a circular saw that can cut through sheet metal that’s as thick as yours is. Get a diamond saw blade. Diamond saw blades are stronger than other saw blades you can use with a circular saw.
How do you cut galvanized steel pipe?
To cut galvanized pipe, use either a tube-cutting tool, a reciprocating saw, or a hacksaw. To use a tube-cutting tool, you’ll secure the vice-like tool around the pipe, then tighten it until it cuts through the pipe. Once you cut it, you’ll need to use a rounded file to sand down any burrs.
How do you cut hard steel?
An angle grinder fitted with an abrasive metal-cutting disc works well to cut all kinds of metal, including bolts, angle iron, rebar and even sheet metal. But the discs wear down quickly, cut slowly and shrink in diameter as you use them. Instead, we recommend using a diamond blade that’s rated to cut ferrous metal.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
What metal can cut steel?
For steel-cutting, the favored carbide is tungsten carbide. Tungsten carbide is composed of about half carbon and half tungsten. Found naturally in powder form, the material is cemented to create tips for chisels and saw teeth.
Can you cut steel with a carbide blade?
Carbide metal cutting blades offer a full range of sizes and profiles for cutting both ferrous and non-ferrous metal. Ferrous metal blades can be used for cutting all types of metal construction products including steel siding, roofing, steel studs, and other construction steel.
Can I use a grinder blade in a circular saw?
The exposed blade can cause significant injuries as the uncontrollable tool flies backwards and strikes the operator. For these reasons, angle grinders must never be fitted with circular saw blades.
Can pipe cutter cut steel?
Pipe cutters are a simple hand-held tool that easily cuts through steel, copper, bronze and aluminium tube sections. The tool is constructed in a ‘C’ shape that has rollers and a cutting blade set within the inside edge.
What is the best tool for cutting metal?
Hacksaw. The original metal-cutting tool, the manual hacksaw, is an easy, inexpensive option for cutting through metal (and a slew of other materials). Ideal for small projects and home improvement needs, the hacksaw is typically one of the first tools a homeowner purchases, thanks to its low cost and versatility.
Which way should the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
