Put this on my worm drive Skilsaw Made about 80 cuts through the menard’s premium steel roofing 28g. Straight cuts were made through four sheets at a time. I did lose a tooth somewhere along the way, but it didn’t affect the cutting ability. In case you didn;t know, Menards does rent roofing panel cutters in both straight and angled versions, if you don;t feel comfortable using a circular saw.
Engineered with cobalt infused tungsten carbide to extend cutting life. Laser cut vibration dampening slots to minimize heat, sound and noise. Designed to provide clean cutting and a burr-free finish.
circular saw blade for thin metal Related Question:
Can I cut thin metal with a circular saw?
Cut Metal with Your Circular Saw It may not be an obvious choice, but fitted with the right blade, a circular saw is a great metal-cutting tool. In our test, it cut through rebar like a hot knife through butter. You can cut mild steel up to about 3/8 in. thick using a ferrous-metal-cutting blade.
What type of blade is used for cutting thin metal?
Ferrous blades are ideal for cutting metals that contain iron, such as stainless steel or cast iron. Choose a non-ferrous blade when cutting softer metals, like aluminum or copper. For the best results, use a diamond blade that’s rated to cut the type of metal you are working with.
Can you put a metal blade on a circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What do you cut thin metal with?
Tin Snips. Like a pair of scissors, tin snips are an inexpensive handheld tool that cuts straight, or if the blade is curved, can cut curves and circles. Tin snips are ideal for cutting soft metals like aluminum and copper, and are especially useful for cutting sheet metal, gutters, metal roofing, and studs.
Can you turn a circular saw blade backwards to cut metal?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
Can you put an angle grinder blade on a circular saw?
The exposed blade can cause significant injuries as the uncontrollable tool flies backwards and strikes the operator. For these reasons, angle grinders must never be fitted with circular saw blades.
Can a carbide blade cut metal?
Tungsten carbide, called simple “carbide” in the building trades, is three times harder than steel; and when placed on circular saw blades, reciprocating saw blades and grinder discs, tungsten carbide cuts cleanly through steel.
Can I put a metal cutting blade on my miter saw?
Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.
Can I use a wood blade to cut metal?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
What saw to use to cut metal?
The hack saw is the most common hand saw used to cut metal. The hack saw’s most recognizable characteristic is a rigid, C-shaped frame attached to a pistol grip handle. A thin, slightly flexible blade runs across the open portion of the hack saw’s frame.
Can you use a masonry blade to cut metal?
Yes, certain diamond blades can cut through metal, but this will depend entirely on the blades application. Most diamond blades are used to cut through concrete, brick, tile, and asphalt. But, not all blades are the same.
Can carbide tipped blade cut aluminum?
Cutting aluminum with a circular saw requires a few special steps. Ensure that you have the right blade. A carbide blade works but is more likely to grab the material. If possible, purchase a blade specially designed for cutting aluminum and other non-ferrous materials.
How do you cut thin metal by hand?
Start by taping both sides of the sheet metal directly over the line you want to cut and clamp the metal to a work station so it doesn’t move. Then, grip the saw with both hands and push the blade through the metal to cut it. For thin sheets of metal, you can use tin snips to cut through it.
How do you cut thin aluminum by hand?
Hand Tools for Cutting Aluminum Sheet These low-cost options include hammer and chisel, compound snips, or hacksaws. Green or red metal snips, or hand shears, can cut sheet along curves as well as straight lines, but they will distort both edges when making internal cuts on a piece of aluminum sheet.
Which way should the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
