“I need a 7¼” blade to cut 4×8′ sheets of plywood for cabinets. Handle the saw carefully because the telescoping blade guard will not extend through the zero-clearance base to cover the spinning blade. Then retract the saw blade above the base, and attach the zeroclearance plate using double-face tape.
In general, many woodworkers either use combination blades or rip blades when cutting plywood, and both types of blades are perfect for plywood cutting. Given the many types of brands and models of circular saw blades in the market today, choosing the best blades become doubly difficult. A circular saw is a versatile tool, and as long as you are using the right blade, you can quickly cut through plywood using a circular saw and end up with a refined finish.
The thin kerf and wide set teeth enable a blade like this to cut to softwoods like pine and pressure treated beams a little more easily. The excessively high tooth count cut very slowly, which actually can cause the blade to become pinched between the pieces being cut and cause burning. Not related to the cut itself, but the blade doesn’t have any relief cuts or stabilizer vents.
circular saw blade for thin plywood Related Question:
Which blade is best suited for cutting thin plywood?
To get the best-quality cuts, invest in an 80-tooth blade designed for sheet goods. The small teeth take little bites to reduce chip-out and are steeply beveled at their edges to score the veneer face. You’ll have to slow your feed rate, but will get a much smoother edge.
How do you cut thin plywood without splintering?
Naturally, you’ll want to select a fine tooth blade that works well to cut plywood. These tend to have more teeth per inch, as well a higher bevel angle that can slice through the wood. For a circular saw, you can easily pick up a plywood blade for $20 at any home center, and it will work magic on your cuts.
What circular saw blade is best for cutting plywood and why?
Best Circular Saw Blade: Ultra Fine Finish With 60 teeth and a . 059-inch kerf, the Freud D0760X Diablo Circular Saw Blade creates clean, smooth cuts on delicate material like veneer plywood and melamine. This thin kerf greatly reduces the chance of chipping and blowouts, and doesn’t waste any material.
How do you cut thin plywood?
To cut thin plywood correctly, you need to use a table saw with a blade that has a high teeth count. The more the teeth on the saw blade, the better it will cut plywood. You can also tape down both sides of the thin plywood with masking tape as that will prevent it from tearing or breaking.
What do you put under plywood when cutting?
The Secret is 2×2 Foam Board Here I have 8 laid out to support a full sheet of 3/4″ plywood. And unlike full insulation sheets, they are so easy to store. I just stack them up on a top shelf or under my bench.
How do you cut a OSB with a circular saw?
When cutting with a circular saw, the blade teeth enter the wood from the bottom and exits from the top, and the point of exit is the one most likely to chip out. For this reason, it’s a good idea to turn the sheet over to cut it, so the finish face is down.
How many teeth do you need for plywood?
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade.
Can a circular saw cut plywood?
Make circular saw cuts so clean that you don’t have to sand or touch up the plywood edges. We show you out seven best tips for making smoother, straighter and more accurate cuts on big sheets of plywood. Your circular saw can cut just as well as a table saw.
How many teeth should a circular saw plywood blade have?
Framing blades have 24 teeth and are effective for jobs such as rough carpentry, where speed is more important than getting a clean cut. Plywood blades have 100 or more fine teeth designed to create a finish with minimal splintering.
How do you cut plywood without a blowout?
Install the proper blade on your circular saw for different kinds of plywood. For precision cuts on hardwood plywood such as in cabinetry, use a carbide-tipped blade with square-cut teeth. Known as a cross-cut blade, it cuts smooth and straight without chipping or splintering loose fibers.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
How do you cut Luan plywood?
You CAN cut luan along the grain (cutting along the 8 foot length) without scoring, but is is always best to score it before cutting no matter which direction you cut. There is one way to greatly help limit the splintering when cutting any wood veneer: Place masking tape over the cut line first.
How do you cut 2mm plywood?
2mm birch ply would be hell with a skinny Xacto knife but it does cut decently with a sturdy utility knife. Another option that works well is a hand fret saw used with a “birdsmouth” bench board.
What is the thinnest plywood?
The thinnest plywood on the market ranges all the way down to 2mm thick (just over 1/16 inch). These are obviously specialty plywood products, manufactured for special applications which can’t be accomplished by any other product on the market, whether plywood or some other material.
How do you cut plywood by hand?
Cutting Plywood With a Handsaw Always start with a sharp saw blade. A miter handsaw has a stiffer blade and will help if you’re making smaller cuts. For longer cuts that need to be straight, consider using a stiff board as a jig to guide your saw blade. Simply clamp the board along your cut line.
