Most of us have been there at some pointstaring at a blade in one hand and a saw in the other wondering what the correct circular saw blade direction is. Getting the circular saw blade teeth going the correct direction is what’s at the heart of the matter. The saw’s motor runs the blade rotation in a way that the circular saw teeth direction points up as it enters the wood you’re cutting.
When I first started using circular saws, what I knew about the circular saw blades was this: how many teeth the blade has and the size of the blade. Back in the spring, I had the opportunity to peer over the shoulder of a demo guy at a Diablo circular saw blades booth at a Home Depot event and was mind-blown at how he was slicing through thick metal like the circular saw blade was a hot knife through butter. Before jumping into which way to insert a circular saw blade when changing the blade, let’s first talk about which direction the blade of the saw actually cuts.
A challenge when determining the right direction for table saw teeth is that the saw conceals most of the blade, making it hard to see the teeth. Hand saw: If you’re using a non-motorized hand saw for cutting wood, the blade’s teeth should always point in a downward direction. If you’re not sure which direction the teeth on your saw blade should point, contact an expert on the team at Luxite Saw.
To avoid this, clean your circular saw blade frequently, especially when not in use! By default, the blade of this kind of saw rotates in an anti-clockwise direction. On average, it costs between twelve and eighteen dollars for a seven-and-a-quarter-inch circular saw blade.
This is not to say that if you stop cutting your heavy wood with the circular saw blade, it is just a reminder that cutting heavy wood could greatly affect the sharpness of your circular saw blade. If you’re using a circular saw blade and the blade in the machine isn’t strong enough to stand hard work like cutting through a thick wood, then you might need to get a new one. If you’re using a circular saw blade and your intention is to cut neatly through a wood, a blunt or weak blade would cut extra and excess wood.
circular saw blade rotation Related Question:
Which way does circular saw blade rotate?
Circular saws cut on the upward stroke, which means that they rotate in a clockwise fashion, cutting from the bottom up. This is why when you’re using a circular saw, the side of the wood that will be your “good” side should be facing down.
Do all circular saws rotate the same direction?
Circular Saws This means that the circular saw cuts wood on the upstroke. For a right handed circular saw (most common), this means that the blade rotates counterclockwise, which is similar to the table saw. For a left handed circular saw, the blade rotates clockwise.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).
Which way should blade face on circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out. It’s not a hard, fast rule, though. You should always double-check.
Which way should a blade be installed on a circular saw?
Almost all circular saw blades have an arrow that is either printed or engraved on the blade. This arrow indicates which way the blade should be installed in the saw. The arrow needs to point towards the front of the circular saw. If we don’t see an arrow the teeth need to face towards the front of the saw.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
Why are some circular saw with blade on left?
Traditionally, all worm drive saws operated in a blade-left orientation. Furthermore, this orientation likely places the weight of the saw over the portion of the material the user wants to keep, making it easier to stabilize the saw during the cut.
How do I know when to change my circular saw blade?
Look for worn-down, chipped, broken and missing teeth or chipped carbide tips that indicate it’s time to replace a circular saw blade. Check the wear line of carbide edges using a bright light and magnifying glass to determine if it’s beginning to dull.
Why is my circular saw blade smoking?
Improperly Set Circular Saw Blade Can Cause Smoking By flaring the teeth, you make sure they are the only thing contacting the material during the cut. If your blade set is disrupted for any reason, then your blade’s body could be contacting the wood during the cut, causing heat and smoke.
Is it better to have more teeth on a saw blade?
In general, blades with more teeth yield a smoother cut, and blades with fewer teeth remove material faster. A 10″ blade designed for ripping lumber, for example, usually has as few as 24 teeth and is designed to quickly remove material along the length of the grain.
How many teeth should my saw blade have?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
Why is it called a worm drive saw?
What is a Worm drive saw? A worm drive saw has the motor attached at the rear. This is very powerful and its power is driven through two gears each set at 90 degrees. This setting implies that the engine produces more torque but less Rotation Per Minute (RPM) of about 4,500.
What is the benefit of a rear handle circular saw?
Because of the placement of the motor, Rear Handle Circular Saws get a heck of a lot more torque than a standard Sidewinder Circ Saw. Sidewinders get more RPM’s, but the torque and power beats speed when you’re cutting into hardwoods with a Worm Drive (rear handle) saw.
How long do Diablo blades last?
They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they’re used to cut.
Is it worth sharpening circular saw blades?
When your circular saw blade becomes dull, not only will it give you a rougher finish, but your saw’s motor will have to work harder and may burn out sooner. Sharpening your saw blades will save you money in the long run because you’ll get better cuts, and you’ll have to replace your saw and blades less often.
