Blade capacity determines the maximum depth of cut a saw can achieve. The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
Power is what gives the saw cutting ability, the higher the power, the better, when it comes to choosing a circular saw. There are two figures used by manufacturers to rate the power of a circular saw in the UK and Europe Watts is used and in the US amperes are used. For cordless circular saws as with other cordless power tools, the Volts will determine how much power is available, the most common power supply or battery size for power tools is 18V. As I said before many top brands like Hikoki, DeWalt and Makita have invested in new Lithium-ion technology and offer much higher voltage cordless options that give a great cutting performance.
When we talk about the diameter of a circular saw blade, we’re talking about the length of the line between the tips of two of the blade’s opposite teeth, passing through the center of the saw blade. Typical circular saw blade diameter ranges from 6-1/2 inches to 12 inches, but saw blades with 3-3/8″ up to 16″ can found on the market. One more thing you should take care when choosing a large or small diameter circular saw blade is the power of circular saw.
circular saw blade sizes explained Related Question:
What do the numbers on a circular saw blade mean?
The Number of Teeth: TLDR; More teeth: Smoother, finer cut. Fewer teeth: Faster, rougher cut. The correct number of teeth is important to ensure that you achieve a smooth cut with optimal chip removal and as little friction possible whilst sawing.
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
How do I know which circular saw blade to use?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
How thick can a 4 1 2 circular saw cut?
The max cutting depth is 1-11/16″ at 90 degrees and 1-1/8″ at 45 degrees.
What size saw blade do I need?
The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
Can I use a smaller diameter blade on my circular saw?
Can I use smaller blades? Short answer: Within reason, you can. Long answer: For safety reasons the blade gap should not be larger than 1/8″ (3 mm). If you do not care about workplace safety, you can use smaller circular saw blades in most cases.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can I use a 10 inch blade on a 12 inch miter saw?
As I’ve mentioned above, you can easily replace your 12 miters saw with a 10-inch miter saw blade. By doing so, you can enjoy the optimal speed, performance, and precision needed while cutting. That said, it’s equally true that you can’t make the thicker or deeper cuts using a 10-inch blade over 12-inch.
Can you use a 7 inch blade on a 10 inch saw?
Yes, you can use a 7” blade on a 10” blade table saw. There will be a diminution in the depth of the cut, but it is possible to use a smaller blade. There will be less noise and less waste (sawdust) using the smaller blade, too.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
What size saw blade for 2X4?
You need a minimum 5-3/8 inch size circular saw blade to cut a 2X4 at a 90 degree angle in one cut which is a crosscut. If you want to cut a 45 degree bevel with this size circular saw it will take 2 cuts. You could go with a 7-1/4inch or 10 inch blade to avoid making multiple cuts with the 45 degree bevel angle.
Will a 4.5 inch circular saw cut a 2×4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
Can a 5.5 inch circular saw cut a 2×4?
The Ryobi cicular saw is a 5.5″ saw, and it can cut a 2×4, just barely.
How thick of wood can a 7 1 4 circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
