This commercial-quality blade is ideal for rip and cross cutting two-sided plywood, whether finished or unfinished. There’s no comparable blade on the market today. The Ply Veneer Worker uses the same high-precision technology that’s behind our popular Woodworker II blade.
I have a Milwaukee Endurance 40 tooth blade model # 48-40-4128 mounted on mine and I am very satisfied with the results it provides. I have used it on ¼”, ½” and ¾” oak and cherry ply and it has yielded splinter free results every time. I have no idea who makes their blades for them; I bought it along with a Milwaukee 3690-21 from Amazon a few years ago and haven’t had to replace or sharpen it yet.
“I need a 7¼” blade to cut 4×8′ sheets of plywood for cabinets. Handle the saw carefully because the telescoping blade guard will not extend through the zero-clearance base to cover the spinning blade. Then retract the saw blade above the base, and attach the zeroclearance plate using double-face tape.
circular saw blade veneer Related Question:
Can you cut veneer with circular saw?
With the circular saw When you tackle plywood or veneered furniture board with a circular saw, the splinters are created at the top. What you can do is saw twice. First you make a shallow cut of 3 to 4 mm and then you cut the board. This prevents the wood fibers from being lifted up, creating a friable cutting edge.
Can circular saw blades be hardened?
Yes, circular saw blades are hardened steel. This is accomplished by positioning the blade near a source of intense heat. The often-utilized temperature is between 900 and 1,100 degrees Celsius, which is ideal for hardening steel blades.
What is the best circular saw blade to cut laminate?
What blade should I use to cut laminate countertop? If you use a circular saw, it’s best to use a fine-toothed narrow blade with at least 40 teeth. When it comes to cutting laminate countertop, blades with carbide tips usually last longer than regular steel.
How do you cut veneer without chipping?
Score the cut line with a sharp razor blade. This cuts the veneer and helps reduce chipping. Run tape across the cut line in order to support the veneer and reduced chipping from tear out. Use a clean blade that’s designed specifically for cutting veneers.
How do you keep plywood from sliding when cutting with a circular saw?
Method 1: To prevent splintering on side of the plywood, all you need to do is place the plywood sheet with its best side facing down. That way, any splintering will occur on the top surface, which is the backside of the sheet. Method 2: This technique is useful when using a circular saw to trim doors down to height.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
What kind of steel is used in circular saw blades?
What Type of Steel Are Circular Saw Blades Made From? Before we get into the manufacturing process it is essential to determine the type of hard steel that is used to make the blades. It is mostly high carbon steel or a blend of different steels, depending on what the blade is intended for.
Are old saw blades good for making knives?
The biggest advantage of using an old saw is the lack of metallurgy you need to do. The blade is already the right hardness for holding an edge, so you don’t need to treat the steel to make it a good knife.
What is L6 steel?
L6 Tool Steel is a versatile, oil-hardening tool steel that is characterized by very good toughness. L6 tool steel is suitable for use as tools, dies, and machine parts, which require a good combination of hardness and toughness.
Can I cut a laminate countertop with a circular saw?
A good quality circular saw will most likely do the trick, although it is not just as simple as picking the right saw. Besides knowing how to cut laminate countertop, you will also need the proper tools for the job at hand.
What do I use to cut laminate countertop?
Cutting a post-form laminate countertop to length requires a clean, straight cut. The best DIY tool for the job is a circular saw with a fine-tooth carbide blade made for laminate (the same blades are typically sold for non-ferrous metals and other types of plastics). You can also use a jigsaw with a fine-tooth blade.
Can I use a circular saw to cut laminate flooring?
A Circular Saw: You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. Sawhorses and a piece of plywood would make a pretty ideal workbench for this task and would be the easiest and most convenient method, in my opinion.
Can you cut veneer with a razor blade?
I’ve discovered that you don’t need a special veneer saw to cut thin veneer cleanly. Instead, I use a rotary cutter you can find inexpensively at a fabric or craft store. The circular blade is razor-sharp, and it cuts wood veneer by just rolling the cutter against a steel straightedge.
What is the difference between crown cut and quarter cut veneer?
There are two methods of slicing Decorative Veneers, the difference being the way the flitch is placed in the slicer. Quarter cut is when the timber is sliced at right angles to the growth rings and the result is a straight line pattern. Crown cut is when the timber is sliced parallel to the growth rings.
Can you cut veneer with scissors?
Wood Veneers Can Be Cut With A Razor Kinfe Or A Scissors You can cut the paper backed veneers with a utility knife or a scissors. For most surfaces, you cut the veneer larger than the area that you are going to veneer.
