24T Carbide-Tipped Max Efficiency Ultra-Thin Kerf Framing Saw Blade is ideal for a framers using cordless circular saws for a full range of wood cutting applications. The ultra-thin kerf design and specially engineered blade teeth to assist in reducing the load put on the tool while cutting, with a reduced swing width that allows for smoother material removal with less cutting resistance. The result is increased cutting efficiency, and users get up to 70% faster cutting and up to 70% more cuts per charge compared to standard blades.
Makita circular saw blades are some of the most versatile and highest quality available on the market today. Using the latest technologies and materials, Makita consistently produces blades that cut cleaner and last longer. From the smallest 3-3/8″ to the 16-5/16″ big boy, the Makita name means quality and great results….cut after cut.
circular saw blades b&q Related Question:
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
What type of blade is best for circular saw?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
What are the different types of saw blades?
There are three types of blade (although the number of teeth are only a rough guide) ripping blades (24 to 30 teeth), combination blades (30 – 60 teeth) and cross-cut blades (60 to 90 teeth).
Can I use any circular saw blade?
What is this? Not every circular saw is adequate for each material, which means that the blades are made according to whether you need them to cut wood, metal or concrete. Along with that, it is a fact that a single circular saw may need different special blades that aren’t universal or interchangeable.
Are Diablo blades worth it?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
Which saw blades make the smoothest cut?
With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are the go-to choice for finish carpentry and other applications that require precision and a smooth finish.
Are Dewalt circular saw blades good?
Dewalt Circular Saw Blade Despite the lower price tag, it offers great performance to the user for a high value for money thanks to its 7 ¼ inch blade size rating. As for the teeth count, you get a total of 60 teeth that is much higher than even some of the more expensive options out there.
How do I identify a circular saw blade?
Most circular saw blades are carbide tipped, and the orientation of the teeth determines the blade’s primary use. Flat-top (FT) teeth are best for ripping hard and soft woods, while blades with alternating top beveled (ATB) teeth are better for crosscutting.
How many teeth should my circular saw blade have?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
What type of blade is best for cutting wood?
Teeth: The number of teeth indicates which type of cut it’s best for. Blades with fewer teeth (18 to 30) cut faster and cost less than higher-toothed options; they’re ideal for making rip cuts in wood. Blades with a higher tooth count (60 to 80) are better for crosscuts in wood because they produce a smoother edge.
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
What is a TCT blade?
A TCT (Tungsten Carbide Tipped) blade is a resharpened circular saw blade. TCT saw blades can be used for the following items: wood, some ferrous metals, non-ferrous metals and plastics. Typically, a saw blade is a toothed blade designed to cut metal.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
